Error Code List.pdf - 第69页
AV131 ERROR CODE LIST 2.4 Errors D79EEC- 91-210-A 0 2.4- 46 4067 Th er e is no s igna tu re on bo ot se cto r. R e fe r to He lp fo r d eta il. DESCRI PTIO N Acce ss to un si gn ed floppy disk CAUSE Unsigned floppy d isk…
AV131
ERROR CODE LIST
2.4 Errors
D79EEC-91-210-A0
2.4-45
2763
PCB recognition error (48)
DESCRIPTION
PCB recognition error was detected.
CAUSE
Improper area of the target hole
SOLUTION
Check the condition (any burrs) of the target hole.
NOTE
2764
PCB recognition error
DESCRIPTION
PCB recognition error was detected.
CAUSE
Trouble occurred in PCB recognition.
SOLUTION
Check the condition of the target hole.
NOTE
2765
PCB recognition error
DESCRIPTION
PCB recognition error was detected.
CAUSE
Trouble occurred in PCB recognition.
SOLUTION
Check the condition of the target hole.
NOTE
2766
PCB recognition error
DESCRIPTION
PCB recognition error was detected.
CAUSE
Trouble occurred in PCB recognition.
SOLUTION
Check the condition of the target hole.
NOTE
2767
PCB recognition error
DESCRIPTION
PCB recognition error was detected.
CAUSE
Trouble occurred in PCB recognition.
SOLUTION
Check the condition of the target hole.
NOTE
4066
This is write protected disk.
Please release write protect. Refer to Help for detail.
DESCRIPTION
Unable to write signature to the floppy disk.
CAUSE
Floppy disks formatted by old machine or unformatted disks require a signature.
SOLUTION
Release write protect then operate again.
NOTE
AV131
ERROR CODE LIST
2.4 Errors
D79EEC-91-210-A0
2.4-46
4067
There is no signature on boot sector. Refer to Help for detail.
DESCRIPTION
Access to unsigned floppy disk
CAUSE
Unsigned floppy disk was used.
SOLUTION
Reformat the floppy disk.
NOTE
9293
Driver soft interlock
DESCRIPTION
Driver soft interlock occurred.
CAUSE
Something is wrong with the software processing.
SOLUTION
Check the conditions of the time when the error occurred, and the details of the error, and then contact us.
NOTE
9294
Soft task comm. Error
DESCRIPTION
Soft task comm. Error occurred.
CAUSE
Something is wrong with the software processing.
SOLUTION
Check the conditions of the time when the error occurred, and the details of the error, and then contact us.
NOTE
9295
Soft calculation error
DESCRIPTION
Soft calculation error occurred.
CAUSE
Something is wrong with the software processing.
SOLUTION
Check the conditions of the time when the error occurred, and the details of the error, and then contact us.
NOTE
9304
Motion incomplete
DESCRIPTION
Axis motion is incomplete.
CAUSE
Movement on the Table X-axis is not completed within a specified time.
SOLUTION
Turn off the servo switch, and manually move the faulty axis. When the axis does not move smoothly, lubricate the
ball screw.
Move the faulty axis with a inching, and inform the manufacturer about its moving condition.
NOTE
9305
Soft parameter error
DESCRIPTION
Axis motion is incomplete.
CAUSE
Movement on the Table X-axis is not completed within a specified time.
SOLUTION
Check the contents of invalid software parameter on the error screen and correct the production data or parameter
data if necessary. In addition, inform us of the problem.
NOTE
AV131
ERROR CODE LIST
2.4 Errors
D79EEC-91-210-A0
2.4-47
9308
Soft overrun limit
DESCRIPTION
Axis motion is incomplete.
CAUSE
Movement on the axis is not completed within a specified time.
SOLUTION
Check the axis where the error occurred on the error screen and correct the production data or parameter data if
necessary. In addition, inform us of the problem.
HINT
If the error occurred with the WH axis, there may be a problem in the lead wire diameter data in the parts data
besides the parameter of the WH axis.
NOTE
9369
Exclusion process error
DESCRIPTION
Exclusion process error occurred.
CAUSE
Something is wrong with the software processing.
SOLUTION
Check the conditions of the time when the error occurred, and the details of the error, and then contact us.
NOTE
9372
Position interrupt error
DESCRIPTION
Position interrupt error occurred.
CAUSE
An unnecessary interruption occurred during the positioning of XY-axes.
SOLUTION
Restart the machine.
If the error occurs again, contact us.
NOTE
9373
Complete interrupt error
DESCRIPTION
Complete interrupt error occurred.
CAUSE
An unnecessary interruption occurred during the positioning of XY-axes.
SOLUTION
Restart the machine.
If the error occurs again, contact us.
NOTE
9400
Axis error
DESCRIPTION
Axis fault detected.
CAUSE
An axis error has occurred; however, its factors cannot be determined.
SOLUTION
Check the conditions of the time when the error occurred, and the details of the error, and then contact us.
NOTE