1OM-1625-004_w.pdf - 第158页

1OM-1603 3-35 3. Component Replenishment : Chap.3 3.3 Component Replenishment with Splicing Function The splicing function makes it possible to replenish the supply of taped components without stopping the automatic oper…

100%1 / 219
1OM-1603
3-34
3. Component Replenishment : Chap.3
(6) Set the number of reloaded components.
•
Replenishment of New Tape
Press the [Comp.Reld.] button.
Check the remaining number of components in the feeder list and conrm
that the feeder is replenished with components.
•
Replenishment of Used Tape
(when the number of taped components differs from the number of
components
speciedinthecomponentlibrary
data)
Press the [Cmp Rem] button. The "Cmp Rem" window opens.
Enter the number of reloaded components.
Check the remaining number of components in the feeder list and conrm
that the feeder is replenished with components.
(7) Press the [START] button on the operation panel.
The automatic operation is re-started.
1007-003
1OM-1603
3-35
3. Component Replenishment : Chap.3
3.3 Component Replenishment with Splicing Function
The splicing function makes it possible to replenish the supply of taped
components without stopping the automatic operation.
Notice
A splicing tape and a tape cutting jig are also required for splicing.
When [Operation], [Opr. Mode] and [Splicing] are selected in this order to open
the "Splicing" window, and the specied conditions are fullled, the "Machine
Information (Alarm for Splicing)" window opens.
F1C26
Procedure
(1) Check the contents of the machine information and press the [OK] button.
The "Machine Information" window closes.
(2) Press the [Comp.Reld] button on the submenu bar of the "Comp.Reload"
window to open the "Product" window.
1012-005
1OM-1603
3-36
3. Component Replenishment : Chap.3
(3) Press the "Fdr. No." button which corresponds to the feeder No. (FDR-No. to
be set ready for splicing) displayed in the "Machine Information (Alarm for
Splicing)" window and check the scope of the component data.
(For the component, for which the preparation for splicing is required, the
splicing icon is displayed in red).
F1C27
(4) Perform the splicing operation and replenish the feeder with components.
Reference
Refer to the instruction manuals of the tape cutting jig and the splicing tape for
detailed information on the splicing work.
(5) Follow the step below to set the replenished components.
•
When a new tape is spliced:
Press the [ ] (component replenish) button.
Check the remaining number of components in the feeder list and conrm
that the feeder is replenished with components
.
•
Splicing of Used Tape
(when the number of taped components differs from the number of
componentsspeciedinthecomponentlibrary
data)
Press the [ ] (Splicing Component Remainder) button. The " Splicing
Component Remainder" window opens.
Enter the number of reloaded components.
Check the remaining number of components in the feeder list and conrm
that the feeder is replenished with components.
1012-005