CM88Maintenace1 - 第118页
Page 1-80 Check Every 1000 Hours (Once T wo Months) 3Y3C-E-MMD01-A06-01 6 . T urn off the servo switch. 7 . Open the rear center safety cover . 8 . Set the main axis motor at 600 ± 10 pulse by rotating it by hand. 9 . Ma…
Page 1-79
REGULAR
MAINTENANCE
1
Check Every 1000 Hours (Once Two Months)
3Y3C-E-MMD01-A06-01
Grease supplying procedure for the linearways D and E
1. Press .
• The “Machine adjustment menu” screen
appears.
2. Press Output check .
• The “Output check” screen appears.
3. Press
UNLOCK
and .
• Change it to .
4. Press .
• The “Machine adjustment menu” screen
reappears.
5. Press Axis information .
• The “Axis information” screen appears.
Machine
adjust
3Y3C-EEn-Ma-001
3Y3C-EEn-MaOc-001
3Y3C-EEn-Ma-001
To the next page
Mount
Prohibit
Mount
Permission
1
2
Page 1-80
Check Every 1000 Hours (Once Two Months)
3Y3C-E-MMD01-A06-01
6. Turn off the servo switch.
7. Open the rear center safety cover.
8. Set the main axis motor at 600 ± 10
pulse by rotating it by hand.
9. Make sure of the grease supplying
spots, and supply grease to the
linearways D and E of the No. 7
station from the pick-up side.
10. By rotating the main axis motor by
hand again, shift the head to the next
one and set the main axis motor at
600 ± 10 pulse, then supply grease.
∗ Supply grease to all the 12 heads.
11. When you have supplied grease to all
the 12 heads, set the main axis at 0 to
30 pulse by rotating it by hand.
12. Press twice.
• The “Main menu” screen reappears.
OFF ( )
ON ( )
SERVO
3Y3C-AI01
Reverse rotation
3Y3C-113P
3Y3C-EEn-MaAi-003
Right rotation
3Y3C-EEn-MaAi-003
Page 1-81
REGULAR
MAINTENANCE
1
Check Every 1000 Hours (Once Two Months)
1-6-7 Cleaning and Greasing the Cutting Unit
This unit is for cutting tape.
Clean the movable blade, drive lever
fulcrum, and rod end, then apply
grease.
(Oil : VALIANT U2)
1.Movable blade
“1-7-1 Taking apart the Cutting Unit and
Changing the Movable Blade”
2.Lever fulcrum
Grease lever fulcrum through grease nipple.
3.Rod end
Directly apply grease.
1-6-8 Cleaning and Greasing the Take-up Part
This is the drive part which controls the height of lowest limit of nozzle, and picks up chips.
Clean the linear bearing, screw shaft,
cam follower, rod end, lever fulcrum,
and spring, then apply grease.
(Oil : VALIANT U2)
1.Linear bearing
Grease the slide unit.
2.Screw shaft
Directly apply grease to the screw shaft.
3.Cam follower
Directly apply grease to the cam follower.
4.Rod end
Directly apply grease.
5.Lever fulcrum
Grease lever fulcrum through the grease
nipple.
6.Spring
Directly apply grease to the hook and joint.
M60E
DO NOT TOUCH THE CUTTER BLADE WITH YOUR FINGERS.
The edge is so sharp that you may injure yourself.
CAUTION
Rear side
Rear side
1.
3.
2.
4.
5.
6.
3.
2.
1.
2.
01DSC0AA
130CC0AA
01DPC2AA
3Y3C-E-MMD01-A07-02