CM88Maintenace1 - 第123页
Page 1-85 REGULAR MAINTENANCE 1 1-7 Changing the Consumable Parts Every 1500 to 6000 Hours 1-7-1 T aking apart the Cutting Unit and Changing the Movable Blade [1500 Hours] This section describes taking apart, cleaning, g…
Page 1-84
Check Every 1000 Hours (Once Two Months)
1-6-13 Cleaning and Greasing the Front and Rear Conveyors
This unit is for loading and unloading the board.
Clean the linear bearing and screw
shaft, then apply grease.
(Oil : ALBANIA 2)
1.Linear bearing
Apply grease to rail.
2.Screw shaft
Apply grease to screw shaft.
1.
2.
11DGC2AA
3Y3C-E-MMD01-A07-01
Page 1-85
REGULAR
MAINTENANCE
1
1-7
Changing the Consumable Parts Every 1500 to 6000 Hours
1-7-1
Taking apart the Cutting Unit and Changing the Movable Blade [1500 Hours]
This section describes taking apart, cleaning, greasing and changing the cutting unit.
1. Taking apart the cutting unit.
∗ Before starting operation, carry out “Return to
origin” on the “Machine adjustment menu”
screen. If they have already been done, this is
unnecessary.
1. Turn off the power.
2. Open the rear center safety cover.
3. Loosen bolts (M3) with a hexagonal
wrench, and remove the cover.
4. Loosen bolts (M6) with a hexagonal
wrench and remove the cover.
M60E
DO NOT TOUCH THE CUTTER BLADE WITH YOUR FINGERS.
The edge is so sharp that you may injure yourself.
CAUTION
To the next page
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
Lever
Cover
Position of bolts
3Y3C-AI01
4G3C-201P
3Y3C-054P
3Y3C-E-MMD01-A07-02
Page 1-86
Changing the Consumable Parts Every 1500 to 6000 Hours
5. Loosen the bolts (M4) with a hexago-
nal wrench and remove the plate.
6. Remove the movable blade.
∗ Thread the bolts (M4) to the taps of movable
blade and pull it out.
2. Clean (change) and grease the movable blades.
1. Clean the movable blade, plate, and
guide.
∗ If foreign body is in the slot for movable blade,
blow off it with an air ejector.
∗ Change the damaged parts.
To the next page
Plate
Movable blade
3Y3C-055P
3Y3C-056P
3Y3C-057P
3Y3C-058P
3Y3C-E-MMD01-A07-01