CM88Maintenace1 - 第151页
Page 1-113 REGULAR MAINTENANCE 1 Changing the Consumable Parts Every 1500 to 6000 Hours 7 . T urn the coupling of main motor by hand, so that “Main” on the “Axis information” screen gets near to “0 (pulse).” ∗ “Main” mus…
Page 1-112
Changing the Consumable Parts Every 1500 to 6000 Hours
3-B Each setting for checking height
1. Close the rear center safety cover.
2. Turn on the power.
∗ Starting up the machine
“OPERATING MANUAL (for Operators).”
3. Press
Machine
adjust
.
• The “Machine adjustment menu” screen
appears.
4. Press Axis information .
• The “Axis information” screen appears.
5. Turn off the servo switch.
6. Open the rear center safety cover and
upper cover.
3Y3C-E-MMD01-A10-02
To the next page
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
OFF ( )
ON ( )
SERVO
3Y3C-AI01
3Y3C-EEn-Ma-001
3Y3C-AG01
Page 1-113
REGULAR
MAINTENANCE
1
Changing the Consumable Parts Every 1500 to 6000 Hours
7. Turn the coupling of main motor by
hand, so that “Main” on the “Axis
information” screen gets near to
“0 (pulse).”
∗ “Main” must be within 0 ± 10 pulse.
8. Press .
• The “Machine adjustment menu” screen
reappears.
9. Press Output check .
• The “Output check” screen appears.
10. Press
UNLOCK
and .
• Tape feeding prohibited is cleared.
11. Press .
• The “Machine adjustment menu” screen
appears.
3Y3C-E-MMD01-A10-02
To the next page
3Y3C-104P
3Y3C-EEn-MaAi-003
3Y3C-EEn-Ma-001
3Y3C-EEn-MaOc-001
1
2
Tape feed
OFF
Page 1-114
Changing the Consumable Parts Every 1500 to 6000 Hours
12. Press Axis information .
• The “Axis information” screen appears.
13. Turn the coupling of main motor and
set “Main” on the “axis information”
screen to “556 (pulse)” (200degrees).
• The tape feeding cam follower moves to the
lowest position by this operation.
3-C Checking the height of cam follower
1. Check the height of cam follower.
∗ Check the interval of range between 0 mm and
0.03 mm by inserting the thickness gauge
between tape feeding cam follower and the top
face of inspection jig block, and so on.
3Y3C-E-MMD01-A10-03
To the next page
Thickness gauge
Tape feeding cam followerInspection jig block
3Y3C-077P
3Y3C-104P
3Y3C-EEn-Ma-001
3Y3C-EEn-MaAi-006