CM88Maintenace1 - 第155页
Page 1-117 REGULAR MAINTENANCE 1 Changing the Consumable Parts Every 1500 to 6000 Hours 1-7-8 Changing the Board T ransfer Rollers [3000 Hours] The board transfer roller on each conveyor is changed. 1 . T urn off the pow…
Page 1-116
Changing the Consumable Parts Every 1500 to 6000 Hours
1-7-7 Changing the Tape Discharging Hoses [3000 Hours]
Tape cut in the cutting unit is collected to the blower through the waste tape ejecting hose.
Waste tape ejecting hose on the main body and blower side is taped with a hose band. Loosen and
change these.
∗ Check hoses so as they are not disconnected
by hand.
3Y3C-E-MMD01-A11-01
Hose band
BlowerMain body
3Y3C-079P 3Y3C-080P
Page 1-117
REGULAR
MAINTENANCE
1
Changing the Consumable Parts Every 1500 to 6000 Hours
1-7-8 Changing the Board Transfer Rollers [3000 Hours]
The board transfer roller on each conveyor is changed.
1. Turn off the power.
2. Remove the board transfer belt.
∗ Removing board transfer belt.
“1-7-9 Changing the Board Transfer
Belts”
3. Remove the roller with a hexagonal
wrench.
4. Set a new roller.
5. Set the board transfer belt.
∗ Setting board transfer belt
“1-7-9 Changing the Board Transfer Belt”
∗ After changing, check the movement at “Board
transfer” on the “Machine adjustment menu”
screen.
3Y3C-E-MMD01-A11-01
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
3Y3C-082P
3Y3C-081P
Page 1-118
Changing the Consumable Parts Every 1500 to 6000 Hours
1-7-9 Changing the Board Transfer Belts [3000 Hours]
The board transfer belt is on the front, middle (board holder) and rear conveyors.
1. Removing procedure
1. Turn off the power.
2. Move the flat part of belt to the roller
and remove the belt.
3. Remove the belt, pulling out to the
opposite side of conveyor.
3Y3C-E-MMD01-A11-01
Front conveyor
Middle conveyor
(board holder)
Rear conveyor
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
273C-IL059
3Y3C-106P
3Y3C-107P
273C-IL050
Flat part