CM88Maintenace1 - 第3页

Page 3 MAINTENANCE MANUAL (1/2) Production No. Kyushu Matsushita Electric Co., Ltd. 2000 printed in Japan  3Y3C-E-MMD00-A01-03 IMPORTANT Read the instructions and safety precautions presented in this as well as all othe…

100%1 / 166
Page 2
SPECIFICATIONS
4G3C-E-MMA00-A00-01
∗1: It changes depending on the moving distance of X-Y table and the type of part.
∗2: This is the best tact time to fill the conditions below.
• Movable range of board X-Y table is within 11 mm, and feeder table does not move.
∗3: Board changing time is the time after mounting the last part and before mounting the first part
on the next board. (It does not include the movement of feeder axis.)
∗4: Data is created by PT100. This machine can correct only some of data.
∗5: The mounting accuracy is that of board mark (2 diagonal points) recognition by the dummy chip
of our specification.
4G3C-001TE
smetI snoitacificepS
emitgnitnuoM
∗∗
∗
∗∗1
580.0 s pihcrep
∗2
)trappihclareneG(
11.0 s 03.0otpihcrep s )POSsahcusstrapegraL(pihcrep
emitgnignahcdraoB
∗∗
∗
∗∗3
UM/1M/M-S88MC
8.3:noitingocerdraobtuohtiW s
8.4:noitingocerdraoB s
D-C88MC
5.6:noitingocerdraobtuohtiW s
5.7:noitingocerdraoB s
emitgnitcetedkramdaB
.02s 01sielbatY-Xfoecnatsidgnivomehtnehw(tnioprep mm )
elgnagnitnuoM
)eerged1hcaeroftesotelbaliava(seerged953otseerged0
ycaruccagnitnuoM
∗∗
∗
∗∗5
UM/1M/M-S88MC ± 50.0 mm
D-C88MC ± 01.0 mm
egnargnitnuoM
)sreenignEroF(launaMgnitarepOni”egnaRgnitnuoM2-4-1“eeS
noitceridwolfdraoB
)sreenignEroF(launaMgnitarepOni”noitceriDwolFdraoB3-4-1“eeS
metsyslortnoC
retupmocorciM
yromemlanretxE
DHnognidneped,atadarepyrassecensisetybM1(.001TPotdevassiataD
)001TPfoemulov
eceip/epyt1ksidyppolfhcni-5.3
atadmargorP
∗∗
∗
∗∗4
stniop0005.xamatadkcolB
snoisivid001.xamkcolbforebmuN
stniop0005.xamtniopforebmuN
ylppusrewoP
1M/M-S88MC
V002sesahp3 ± zH06/05CAV01
D-C88MC
UM-S88MC
zH06/05CAV004sesahp3
noitautculfelbatpeccafomumixaM ± %5
V084/V044/V004/V083egatlovtupnI
rewoP
0.6 AVk
erusserpriaylppuS
5.0 aPM 8.0ot aPM
emulovriaylppuS
003 nim/l
snoisnemidlacisyhP
M-S88MC0526 mm )W( × 4271 mm )D( × 0002 mm )sknabrotacidnignidulcni()H(
1M-S88MC0133 mm )W( × 0181 mm )D( × 0002 mm )sknabrotacidnignidulcni()H(
UM-S88MC0526 mm )W( × 0181 mm )D( × 0502 mm )sknabrotacidnignidulcni()H(
D-C88MC0526 mm )W( × 4491 mm )D( × 0002 mm )sknabrotacidnignidulcni()H(
ssaM
UM/M-S88MC0054 gk
1M-S88MC0024 gk
D-C88MC0084 gk
noitidnoclatnemnorivnE
01:erutarepmeT C˚ 53ot C˚
)noitasnednocerutsiomoN(%57ot%03:ytidimuH
DEL
UM-S88MC Wm5.0:rewoP,mn008:htgnelevaWgnittimEthgiL1SSALC
esioN
UM-S88MCBd67
Page 3
MAINTENANCE MANUAL (1/2)
Production No.
Kyushu Matsushita Electric Co., Ltd.
2000 printed in Japan
3Y3C-E-MMD00-A01-03
IMPORTANT
Read the instructions and safety precautions presented in this as well as all other applicable manuals before
installing, operating, or servicing the CM88S-M/M1/MU Ultra High-speed Chip Mounter / CM88C-D Ultra
High-speed Chip Mounter or any of its equipment.
This manual was current at the time of publication. However, the Ultra High-speed Chip Mounter and its
equipment undergo a continuous program of performance refinement and improvement. Therefore, the data
in the manual may vary from information furnished with the machine and equipment delivered to you.
This manual is provided for the exclusive and internal use of the customer to whom the applicable machine
has been sold only. Duplication or copying of any part of this manual is strictly prohibited without the express
written consent of Kyushu Matsushita Electric Company, Ltd.
CM88S-M/M1/MU
CM88C-D
M11E
DO NOT ALLOW ANY PERSON WHO HAS NOT RECEIVED SPECIAL TRAINING
TO OPERATE THE MACHINE.
The machine may be operated improperly and injure you.
Either carry out training by yourself, or consult the manufacturer.
WARNING
Maintenance Manual (1/2)
Ultra
High-speed
Chip Mounter
Page 4
3Y3C-E-MMD00-A01-01
This manual is for the installation of High-speed Chip Mounter CM88S-
MU.
Installation manual
Installation manual
(Only for CE standard version)
The assembly of each unit is individually indicated by an exploded
view of the parts. Use this for ordering parts or confirming the assem-
bly of the units.
Parts List
Parts List
This manual is for the machine operators, and describes the operating
procedure, precautions and information which is necessary for safe
and effective operation.
ORGANIZATION OF MANUALS
6 manuals (Nonstandard version: 5 copies) are attached to this machine. They are classified into 5
types (Nonstandard version: 4 types). Use each manual according to the working purpose and person
in charge.
The production data of the line including this machine are programed on PT100-G.
Use the programming manual attached to PT100-G.
Operating manual
Operating manual
(for operators)
(for operators)
PT100-G Programming manual
PT100-G Programming manual
This manual is for the engineers who program the production data of
the line, and describes how to create and modify the data by using
PT100-G.
This manual is for the machine engineers, and describes operation
method and teaching of boards and parts.
Operating manual
Operating manual
(for engineers)
(for engineers)
This manual is for machine maintenance, and describes the daily
checks, adjustment and replacement of consumable parts.
Troubleshooting is also included.
Maintenance manual (1/2, 2/2)
Maintenance manual (1/2, 2/2)
Panasonic
Panasonic
CREATE
CREATE
PT100-G Programming Manual
PT100-G Programming manualThis machine’s manuals
Panasonic
Panasonic
CREATE
CREATE
Panasonic
Panasonic
CREATE
CREATE
Panasonic
Panasonic
CREATE
CREATE
Panasonic
Panasonic
CREATE
CREATE
Panasonic
Panasonic
CREATE
CREATE
Operating Manual (for operators)
Operating Manual (for engineers)
Maintenance Manual (2/2)
Maintenance Manual (1/2)
Parts List
This manual