CM88Maintenace1 - 第41页
Page 1-3 REGULAR MAINTENANCE 1 3Y3C-E-MMD01-A01-02 Outline of Maintenance 1. Press Mach prmtr . • The “ Machine parameter menu ” screen ap- pears. 2. Press Machine mainte . • The “ Machine mainte ” screen appears. 3. Sel…
Page 1-2
3Y3C-E-MMD01-A01-03
1-1 Outline of Maintenance
CM88C-M2U automatically estimates the time for regular maintenance by the period time set in
advance and run time, and informs it to the user. Entering the end of maintenance after it, can save
the date of operation in the history. This information also can be the standard to estimate the next
maintenance period.
1-1-1
Checking the Operating Period, Contents and History Information
NOTICE
Neglecting the regular lubrications and exchanging the oil promotes deterioration
of the parts and may cause serious trouble.
As for “the periodical maintenance time (every 1000 hours) (lubrication)” and “the
index oil replacement time,” warning messages appear whenever the main menu
screen is displayed. Then immediately carry out the maintenance.
• When 90% of cycle time is passed, the item
blinks in green on the “Main Menu” screen.
The cycle time is over, the item blinks in yellow.
[The left screen is displaying three items to
indicate the position on the screen.]
• As for only “the periodical maintenance time
(every 1000 hours)” and “the index oil replace-
ment time,” when the 90% of cycle time is
passed, the item blinks in green. Then the
cycle time is over, the item blinks in yellow.
• Pressing OK deletes the warning message
and enables the operation, and perform the
maintenance.
Run time is added to that of previous
maintenance.
Checking operation
Maintenance
Renewal of history
Normal display
Item blinks in green.
Item blinks in yellow.
Normal display
User Screen Machine
90 % of periodic time is passed.
Periodic time is passed.
Next maintenance period is automatically
estimated.
Run time is summed up.
3Y3C-104E02
Page 1-3
REGULAR
MAINTENANCE
1
3Y3C-E-MMD01-A01-02
Outline of Maintenance
1. Press
Mach prmtr
.
• The “Machine parameter menu” screen ap-
pears.
2. Press Machine mainte .
• The “Machine mainte” screen appears.
3. Select the blinking item on the “Main
menu” screen.
∗ As for “Regular mainte by KME,” select “Rou-
tine maintenance.”
4. Move the cursor to the item blinking a
column of caution, and press Manual .
• Contents of item blinking on main menu screen
is displayed on the “Manual” screen.
2
1
3Y3C-EEn-MpMm-001
4G3C-EEn-MpMmRm-001
To the next page
Page 1-4
3Y3C-E-MMD01-A01-02
3Y3C-EEn-MpMmRm-002
3Y3C-EEn-MpMmRm-003
Outline of Maintenance
5. Check the contents of item.
∗ Carry out maintenance to check the contents of
operation.
6. Press .
7. Press Finish .
• Message for checking appears.
8. Press Yes .
•“Run time” is reset, and that to next period is
calculated.
•“History” is renewed.
9. Press History .
• The “History” screen of selected item is dis-
played.
∗ Check the history information.
• History information is displayed in the descen-
dent order.
3Y3C-EEn-MpMmMa-001
4G3C-EEn-MpMmRm-001
3Y3C-EEn-MpMmRm-004