CM88Maintenace1 - 第72页
Page 1-34 5. Checking Nozzle Settings After removing and setting nozzles, check the arrangement of them. The machine has the function to find the nozzle which may be arranged wrong. This is done by recognizing the nozzle…
Page 1-33
REGULAR
MAINTENANCE
1
Check Every 140 Hours (Once a Week)
4. Close the rear center safety cover.
5. Turn on the servo switch.
6. Press
UNLOCK
and Main axis step .
• The main axis moves by steps.
7. Turn off the servo switch.
8. Open the rear center safety cover.
9. Repeat the procedures 1 to 8 of “Set-
ting Nozzle,” and set the nozzle to all
transfer heads.
∗ In cleaning other type of nozzle in succession,
start the operation from the procedure 4
“Removing the Nozzle.”
Rear side
Main axis
3Y3C-129E
3Y3C-AG01
OFF ( )
ON ( )
SERVO
3Y3C-E-MMD01-A04-01
OFF ( )
ON ( )
SERVO
3Y3C-AI01
Page 1-34
5. Checking Nozzle Settings
After removing and setting nozzles, check the arrangement of them.
The machine has the function to find the nozzle which may be arranged wrong. This is done by
recognizing the nozzle after nozzle setting, and judging that the nozzle matches to that arrange-
ment by the diameter. At the same time, the nozzle appearing on the screen can be checked one
by one visually.
When only specified nozzles are removed and set, “Checking nozzle settings” can be omitted.
1. Close the rear center safety cover.
2. Press Nozl set chk .
3. Turn on the servo switch.
To the next page
3Y3C-AG01
Check Every 140 Hours (Once a Week)
3Y3C-E-MMD01-A04-01
OFF ( )
ON ( )
SERVO
Page 1-35
REGULAR
MAINTENANCE
1
3Y3C-E-MMD01-A04-01
4. Select the nozzle.
∗ Several nozzles can be selected.
Pressing can also select all
nozzles at once.
∗ Pressing exist for “Visual check” stops the
machine for each head, and enables to see the
nozzle on the screen.
5. Press
UNLOCK
and Nozl set chk .
• “Checking the nozzle” appears.
∗ The head No. and name of nozzle to check are
displayed.
For the wrong nozzle arrangement, following screen is displayed.
6. Check “Head No.” and “Nozzle.”
∗ When the nozzle check is not over, press
UNLOCK
and Yes to continue checking.
Check Every 140 Hours (Once a Week)
All nozzle s
elect
To the next page.