CM88Maintenace1 - 第90页
Page 1-52 Check Every 560 Hours (Once a Month) 1-5-9 T ransfer Head : Cleaning the Filter (Change) This section describes cleaning and changing the filters among parts used for transfer head. Maintenance is mainly carrie…
Page 1-51
REGULAR
MAINTENANCE
1
Check Every 560 Hours (Once a Month)
1-5-8 Cleaning and Greasing the Feeder Drive Axis
This unit is for moving the feeder table by the servo motor.
1. Turn off the power.
2. Open the rear safety cover.
3. Clean the linear bearing and ball
screw, and apply grease.
(Oil : ALBANIA 2)
a. Linear bearing
Apply grease rail with spatula.
b. Ball screw
Grease nut through grease nipple (2 points).
c. Linear bearing
Grease through the grease nipple (4 points) of
linear bearing slider.
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
3Y3C-AI01
3Y3C-044P
3Y3C-045P
a.
3Y3C-E-MMD01-A05-01
07JGC2AA
c.
b.
Page 1-52
Check Every 560 Hours (Once a Month)
1-5-9 Transfer Head : Cleaning the Filter (Change)
This section describes cleaning and changing the filters among parts used for transfer head.
Maintenance is mainly carried out at the rear side of machine.
NOTICE
It is unnecessary to remove the transfer head in this operation.
1. Removing the filter
∗ Before starting operation, carry out “Return to
origin” and “Stage escape” on the “Machine
adjustment menu” screen. If they have already
been done, this is unnecessary.
1. Press
Machine
parameter
.
• The “Machine parameter menu” screen ap-
pears.
2. Press Machine mainte .
• The “Machine maintenance menu” screen
appears.
To the next page
3Y3C-E-MMD01-A05-03
Page 1-53
REGULAR
MAINTENANCE
1
Check Every 560 Hours (Once a Month)
3. Press Head mainte .
• The “Head maintenance” screen appears.
4. Turn off the servo switch.
5. Open the rear center safety cover.
6. Take off pins with a driver.
7. Remove the filter.
8. Close the rear center safety cover.
9. Turn on the servo switch.
Filter
OFF ( )
ON ( )
SERVO
3Y3C-AI01
O-ring
Pin
OFF ( )
ON ( )
SERVO
To the next page
Rear side
Main axis
3Y3C-090E
3Y3C-046P
3Y3C-AG01
3Y3C-E-MMD01-A05-01
Packing