00191684-01 - 第20页
DLM1 Revolver Head for S-23 HM Retrofit Instructions S-23 H M 6 Attaching the ‘Vacuum generator’ ribbon cable 10/99 edition 20 Fig. 6 - 1 Attaching the ‘V ac uum generator’ ribbon cable Key (1) V el cro fast ener (2) ‘V …
Retrofit Instructions S-23 HM DLM1 Revolver Head for S-23 HM
10/99 edition 6 Attaching the ‘Vacuum generator’ ribbon cable
19
Å Loosen the M2.5 x 5 hexagon socket-head screw (item 6 in Fig. 3 - 1) in the cover (item 5 in
Fig. 3 - 1) and remove the cover.
Å Loosen the four hexagon socket-head screws (item 1 in Fig. 5 - 1) for fixing the vacuum
generator (item 2 in Fig. 5 - 1).
Å Lift the vacuum generator slightly (step A in Fig. 5 - 1).
Å Fix the aluminum square (item 3 in Fig. 5 - 1) contained in the kit to the base using the four
serrated safety washers and four M4 x 10 hexagon socket-head screws provided (items 4 and
5 in Fig. 5 - 1, steps B and C in Fig. 5 - 1).
Å Fix the vacuum generator to the aluminum square (step D in Fig. 5 - 1).
Å Fix the cover to the vacuum generator.
5
5
5
6 Attaching the ‘Vacuum generator’ ribbon cable
Å Remove the protective film from the adhesive surface of the Velcro fastener (item 1 in Fig. 6 -
1).
Å Attach the Velcro fastener to the bottom of the head board (item 3 in Fig. 6 - 1), beneath the
‘Vacuum board connection’ plug (item 4 in Fig. 6 - 1).
Å Make the ‘Vacuum board’ ribbon cable (item 2 in Fig. 6 - 1) into a loop.
Å Remove the film from the adhesive side of the Velcro fastener (item 1 in Fig. 6 - 1) and carefully
press the cable onto the adhesive side.
CAUTION 6
Apply pressure to the board from both above and below when you attach the cable to the
Velcro fastener to avoid bending or breaking the board. 6
DLM1 Revolver Head for S-23 HM Retrofit Instructions S-23 HM
6 Attaching the ‘Vacuum generator’ ribbon cable 10/99 edition
20
Fig. 6 - 1 Attaching the ‘Vacuum generator’ ribbon cable
Key
(1) Velcro fastener
(2) ‘Vacuum board’ ribbon cable
(3) Head board
(4) ‘Vacuum board’ slot
3
4
1
2