CP6 series maintenancech45 周保养.pdf - 第35页
2.17 Carrier System Conveyor Lubrication (CP-643E/643ME only) Arrow marks in the illustration indicate lubrication points. Note: The in-conveyor is depicted in the figure above but the same lubrication areas also apply t…
Procedure
1. Load the grease gun with a suitable amount of Daphne Eponex No. 2.
2. Insert the tube from the bottom groove of the cross roller bearing to where the
bearing makes contact.
3. Inject the grease such that it does not protrude out of the grooves.
Note: Inject grease every two pitches at the support axes (10 locations).
4. Carry out idle operation for several minutes to allow the grease to be adequately
dispersed.
Grease gun
FUJI grease gun kit
Tube (150mm)
Connector
CP6ML027E
(AWPJ9601)
(T2061E)
(K5030H)
Chapter 4 Cleaning and Lubrication
Version 11.3 4-2-21 CP-6 Series Maintenance
2.17 Carrier System Conveyor Lubrication
(CP-643E/643ME only)
Arrow marks in the illustration indicate lubrication points.
Note: The in-conveyor is depicted in the figure above but the same lubrication areas also apply to
the out-conveyor.
CP6ML028E
Middle stopper
Guide bars
(74)
(74)
(73)
(71)
(71)
(72)
(71)
Ball screw
Shaft
Stopper's bearing
Guide bar
Daphne Eponex No.2
✔
✔
✔
✔
T020E
Lubrication
Locations
Lubrication
Freaquency
Types of Lubricants
71
72
73
74
Every month
Every month
Every month
Every month
✔ : Lubricate
Chapter 4 Cleaning and Lubrication
Version 11.3 4-2-22 CP-6 Series Maintenance
2.18 Carrier Lubrication (CP-643E/643ME only)
Arrow marks in the illustration indicate lubrication points.
Note: The in-carrier is depicted in the figure above but the same lubrication areas also apply to
the out-carrier.
CP6ML029
(75)
(76)
(75)
(75)
(75)
LM rail
Cam follower
Daphne Eponex No.2
✔
✔
T021E
Lubrication
Locations
Lubrication
Freaquency
Types of Lubricants
75
76
Every month
Every month
✔ : Lubricate
Chapter 4 Cleaning and Lubrication
Version 11.3 4-2-23 CP-6 Series Maintenance