SIPLACE Line Computer UNIX - 第382页
12 Production Tools / Station and Line Con figuration User Manual Line Compu ter UNIX 12.2 Line Editor Software Version 5 02.xx 10 /2000 Issue 380 I t I I ● Sele ct sublin e "xx.va" and confirm by cl icking on …
User Manual Line Computer UNIX 12 Production Tools / Station and Line Configuration
Software Version 502.xx 10/2000 Issue 12.2 Line Editor
379
I
t I I
12.2.3 Cluster Configuration
Stations of the same machine type (e.g. S20 and S23) within a subline may be combined into clusters. These
are defined by cluster limits. A cluster is made up of all stations up to the first cluster limit in a subline or of the
stations between two cluster limits in a subline.
- A cluster may comprise the station types HS50 or 80S15/S20/S23 or 80F/F4/F5 or G2 (adhesive station).
- The configuration and setup of the stations within a cluster must be identical.
- On each station within a cluster, the same component share (’placement content’) of a given PCB will be
placed.
- The PCBs are assembled by a single station within a cluster. This station is not determined by the line
computer, but by "lift units" located between the stations of a cluster.
- Assembled PCBs are transported to the next cluster by an additional conveyor integrated into the station
concerned.
NOTES
The "Whispering down the Line" feature is not supported within the configured clusters and therefore needs
to be deactivated in the Machine Options Editor (see section 12.1.3).
Moreover, the jobs must always be scheduled by specifying lot type "U" (Infinite) in Job Control (see chapt.
14, section 14.2.3.7.
● On the menu bar on the desktop click on SERVICES --> Line configuration.
The
"Line configuration" selection window opens.
● Click on the Cluster configuration button.
The FSB containing the "Stammdaten: Anlagen" directory opens.
● Select the desired overall line "xx.ak" by double-clicking.
All sublines contained in the overall line are now displayed in the FSB.
12 Production Tools / Station and Line Configuration User Manual Line Computer UNIX
12.2 Line Editor Software Version 502.xx 10/2000 Issue
380
I
t I I
● Select subline "xx.va" and confirm by clicking on OK (or select subline directly by double-clicking on
its entry). The "Cluster configuration" window opens (see
Fig. 12.2.3).
All names of the stations configured in the subline are listed in the display area.
If clusters were already defined, the cluster limits are represented as broken lines in the list.
Fig. 12.2.3 "Cluster Configuration" Window
Defining one or more cluster limits:
● Select the name entry of the desired station by double-clicking on it.
The marking of the cluster limit is displayed below the name entry of the selected station.
● Repeat the procedure, if required.
NOTES
If only one cluster limit within the subline is created, the cluster will start with the first station of the
subline and ends with the station after which the cluster limit was defined.
If the last stations of the subline are to form a cluster, a cluster limit must be created to define the start
of the cluster and after the last station to define the end of the cluster.
Removing one or more cluster limits:
● Select the name entry of a station after which a cluster limit was defined by double-clicking on it.
The marking of the cluster limit is no longer displayed.
● Repeat the procedure, if required.
Menu bar
Stations within the cluster
Display area
User Manual Line Computer UNIX 12 Production Tools / Station and Line Configuration
Software Version 502.xx 10/2000 Issue 12.2 Line Editor
381
I
t I I
Saving the configuration:
● On the menu bar select the option File --> Save.
The cluster configuration will be saved.
● On the menu bar select the option File --> Exit.
The "Cluster configuration" window closes.
In the display area of the desktop the defined cluster limits are identified by red lines in the graphi-
cal display of the relevant line configuration (see
chapt. 3, Fig. 3.1.5) .
12.2.4 Selecting the Production Line
The line computer can only control one line at a time. This overall line is referred to as production line. If several
lines are configured, the possibility exists to switch to a different production line. To do this, all stations must
be reset, the line computer must be shut down and restarted.
To select a new production line:
● On the menu bar on the desktop click on SERVICES --> Line configuration.
The
"Line configuration" selection window opens.
● Click on the Select production line button.
The FSB containing the "Master data: Anlagen" directory opens.
All configured lines are displayed in the selection list.
● Select the desired line "xx.ak" by double-clicking.
The FSB closes and the following dialog box opens: