SIPLACE Line Computer UNIX - 第410页
13 Production Tools / Set-Up User Manual Line Compu ter UNIX 13.1 Set-Up E ditor (Feeder Part and WPC/MTC Editors) Software V ersion 502.xx 10/2000 Issue 408 I t I I - Diagonal X [mm] Offset from the c enter of t he firs…
User Manual Line Computer UNIX 13 Production Tools / Set-Up
Software Version 502.xx 10/2000 Issue 13.1 Set-Up Editor (Feeder Part and WPC/MTC Editors)
407
I
t I I
- Z [mm]
Pick-up height: Offset in Z-direction from the support surface of the waffle pack tray in the waffle pack
tray carrier to the bottom surface of the division of the waffle pack tray (default value: 0.000). Siehe
Fig. 13.1.16.
Fig. 13.1.16 Pick-Up Height: Offset in Z-Direction
- Pick-up ang. [degr]
Pick-up angle (rotational angle) of the component in the tray division
(default value: 0.00). See Fig. 13.1.17.
Fig. 13.1.17 Pick-Up Angle of the Component in the Division of the Waffle Pack Tray
pick-up height
Z (mm)
component
pick-up angle
[degree]
division of
waffle pack tray
waffle pack tray
waffle pack
tray carrier
13 Production Tools / Set-Up User Manual Line Computer UNIX
13.1 Set-Up Editor (Feeder Part and WPC/MTC Editors) Software Version 502.xx 10/2000 Issue
408
I
t I I
- Diagonal X [mm]
Offset from the center of the first division to the center of the last division in x-direction
(default value: 0.000). See Fig. 13.1.18.
- Diagonal Y [mm]
Offset from the center of the first division to the last division in y-direction
(default value: 0.000). See Fig. 13.1.18.
Fig. 13.1.18 Diagonal in X- Direction and Y-Direction
NOTE
If offset values were entered that are not valid for the selected feeder type, the respective editing fields are
surrounded by a red frame. The invalid values must first be corrected before all values can be accepted.
center of last division
center of
first division
diagonal X [mm]
diagonal
Y [mm]
division of
waffle pack tray
carrier
waffle pack tray
User Manual Line Computer UNIX 13 Production Tools / Set-Up
Software Version 502.xx 10/2000 Issue 13.1 Set-Up Editor (Feeder Part and WPC/MTC Editors)
409
I
t I I
13.1.3.6 Nozzle Changer / Machine Options Editor
Clicking on the "Nozzle Changer" option on the SERVICES menu causes the window "Machine Options
Editor" to be opened (see Fig. 13.1.19).
The Nozzle Changer can be configured with the required nozzles for a given set-up in the Machine Options
Editor. The nozzles are allocated to the individual locations (divisions) of the Nozzle Changer. Within a Nozzle
Changer nozzles can be moved or deleted. This allocation can be changed at any time as required.
The Machine Options Editor can also be invoked upon setting up the station configuration in order to permanently
assign particular nozzles to given locations (divisions). This allocation can only be changed there.
If nozzles were assigned to given locations in the nozzle changer in Station Configuration, they are displayed
upon opening the Machine Options Editor. These locations cannot be changed in the Feeder Part Editor.
Fig. 13.1.19 Machine Options Editor
The Machine Options Editor is subdivided into the following areas:
- Menu bar
- Identification field
- Command area
- Selection field "Divisions"
- Selection field "Nozzle"
menu bar identification field
selection field
"Nozzle"
command
selection field
"Divisions"
area