DS-Helios-SD-960-Nordson-ASYMTEK - 第3页
North America Headquart ers 2747 Loker Avenue Wes t Carlsbad, CA 92010-6603, USA +1.760.431.1919 November 2021 AS YMTEK Helios SD-960 Series Dimensions are in millimeters. Specic ations and dimensions subject to change.…
The ASYMTEK Helios
®
SD-960 Series is designed to dispense
medium- to large-volumes of material using the same industry-
leading software and process controls that power our award-
winning micro-dispensing systems. The platform is ideal for
automotive, industrial, consumer, aerospace, and military
electronics assembly applications.
Single- and Two-component Process Solutions. The SD-960
Series delivers a range of comprehensive single- and two-component
solutions for Thermal Interface Material (TIM), potting, gasketing,
and sealing applications — supporting a variety of materials
including epoxies, urethanes, silicones, and abrasive uids.
Valves and Metering Systems. Equipped with ASYMTEK
dispense valves or fully integrated metering systems, you can
customize the SD-960 Series to meet your specic process
requirements. Options such as time-pressure valves, auger valves,
progressive cavity pumps, closed-loop process controls, and servo-
controlled positive rod displacement systems are available.
Process Control. Several process control options are available
including Mass Flow Calibration (MFC), XYZ Needle Sensing,
Dispensed Dot Recognition, and Laser Height Sensing. The
Laser Height Sensor provides automatic substrate-height
calibration and multi-location height measurements. All features
and options work seamlessly to ensure dispense volumes remain
within dened process limits.
Global Application and Technical Expertise. From initial
process development to full scale production, you can rely on
our global application and support teams. Whether you are
dispensing adhesive drops, thermal interface materials, silicone
beads, or potting materials, the SD-960 Series can support your
application.
ASYMTEK Helios SD-960 Series
Medium- to Large-volume Automated Fluid Dispensing
A fully automated uid dispensing platform for thermal interface material
(TIM), gasketing, potting, structural adhesive, and sealing applications.
Features and Benets
• Inline and batch process support
• Suitable for single- and two- component materials
• Camera system enables programming and ducial
recognition
• ASYMTEK Fluidmove® software supports user-
programmable dispense geometries and process controls
• Stainless steel surface interior for easy cleaning
• Hose routing for large-volume dispensing
• Optional Mass Flow Calibration (patented)
• Optional automatic XYZ needle position correction
• Optional Laser Height Sensor for substrate height
correction
ASYMTEK Helios SD-960 Series ASYMTEK Helios SD-960 Series
Dual-drawer, Batch System
ASYMTEK Helios SD-960 Series
Motion System
• X-Travel: 500 mm
• Y-Travel: 525 mm
• X-Y Velocity: Up to 1000 mm/s (39.4 in./s)
• X-Y Acceleration: Up to 1 g peak with S-curve jerk
control
• Z-Axis Velocity: Up to 250 mm/s (10 in./s)
• X-Y Resolution: 0.010 mm (0.0004 in.)
• Z-Axis Resolution: 0.025 mm (0.001 in.)
Facility Requirements
• System footprint: 1000 mm width x 1329 mm depth (39.3 x 52.3 in.)
Computer keyboard/monitor occupy additional 527 mm (20.7 in.)
in the front. Lower door requires 855 mm (33.7 in.) clearance to open
in the front. Recommended clearance behind the machine depends on
uid supply conguration. Dimensional drawings are on the last page.
Contact ASYMTEK for information.
• Air supply: 620 kPa (90 psi 6.2 Bar)
• Main power: 200/240 VAC, 3 wire single phase, 30A, 50/60 Hz
• Noise: Peak ≤ 76.0 dBA; Average ≤ 70.7 dBA Standards compliance:
SMEMA, CE
• System weight: 502 kg (1107 lb)
Mass Flow Calibration — reduces daily setup time by automatically
compensating for changes in viscosity and ow rate and ensures the
right amount of material is dispensed for each part for the entire
production run.
Bar code recognition system, 1D or 2D
Non-Contact Laser Height Measurement
Dual-simultaneous applicator capability
Dual-toggle applicator capability
Low uid sensor
XYZ needle calibration sensor — eliminates the need for operators to
manually re-calibrate the positioning system after changing the needle
or mixer.
Custom AOI hardware and software
Additional options are available.
Contact ASYMTEK for information.
Featured Options
Dispense Area XY
Dependent upon system options and conguration.
Contact ASYMTEK for information.
• Inline:
Up to 500 x 440 mm
(X can be increased with indexing option)
• Batch, single-drawer:
Up to 420 x 380 mm
• Batch, dual-drawer:
Up to 210 x 380 mm for left drawer
Up to 200 x 380 mm for right drawer
Fluid Delivery Method
A wide range of single- and two-component dispense
valves, auger valves, progressive cavity pumps, rod
metering systems and bulk uid supplies are available.
Conveyor
The conveyor specications are dependent upon the
system conguration and selected options. The inline
base model includes a chain type conveyor, with a
product sensor and standard stop pin.
• Motor-driven width adjustment: 35 to 475 mm (1.4
to 18.7 in.)
• Payload: 5 kg (11 lbs)
• Optional double-wide chain payload: 7 kg (15 lb)
Computer and Soware
• Computer: Laptop computer
• User environment: Fluidmove® software —
program dispense geometries and access features
such as Dispensed Dot Recognition.
• Operating systemWindows® 10
Door interlock controls
Stainless steel interior
Pattern Recognition System (camera) including lighting
Adjustable height computer arm
Low pressure sensor
Large purge station
Chain conveyor for inline systems
Single- or dual-drawers for batch systems
Light beacon with audible alarm
Standard Features
North America Headquarters
2747 Loker Avenue West
Carlsbad, CA 92010-6603, USA
+1.760.431.1919
November 2021
ASYMTEK Helios SD-960 Series
Dimensions are in millimeters. Specications and dimensions subject to change.
Contact ASYMTEK for more detailed drawings if required.
Front view of inline system. Additional monitor
supports integrated rod-metering system.
Front view of batch conguration with
dual-drawers.
Side view of inline system with congurable side
openings. Additional monitor supports integrated
rod-metering system.
For more information, visit our
website to nd your local regional
oce or representative.
We have several global locations to
serve you.
North America
Asia Pacic
EMEA
nordsonasymtek.com/global-locations
info@nordsonasymtek.com