00194474-0702_AI_HeadReconfig_X_605_DE EN - 第182页
2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits 07/2010 Edition 182 2.1 1.2 Inst alling the placement head : Place the DLM head template on the head fixing plate. Remove any…
Head Reconfiguration Kits 2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits
07/2010 Edition
181
2.11 Installing the C&P 6/12 placement head
2
Crash DANGER: If the C&P 6/12 is combined with a TwinHead in a 2 gantries placement area the
stationary camera for the TwinHead must be installed offset downwards. See also Chapter
2.12.1. 2
2
Risk of crash: fit the upper light barrier on tray supply 1 of the MTC2 when the C&P6/12 head
should pick-up components from an MTC2. Read the "Assembly instructions: MTC2 - component
trolley" (00193897-) also. 2
2.11.1 Installing the nozzle changer
: To install the nozzle changer, please read the assembly instructions for the X series nozzle
changer (item no.:00194482-).
2
Risk of a head crash: always run the placement heads with the appropriate nozzle changer. The
wrong nozzle changer causes a risk of a head crash.
2
2
On the subject of the reject bin sensor, also read the
assembly instructions for the reject bin sensor, SIPLACE HF series / X series (item no.:00194550-
).
2
2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits Head Reconfiguration Kits
07/2010 Edition
182
2.11.2 Installing the placement head
: Place the DLM head template on the head fixing plate.
Remove any excess screws and add any necessary screws:
fixing screws: 4x DIN912 M4x18 - 8.8 (item no. 00095023-),
Sealing screws: 9x DIN913 M4x6 - ST (item no. 00309422-), secure with gray thread lock paint
(item no. 00318199-)!
Screws in the wrong place could affect the flow of cooling air to the X-axis motor.
2
2
2
Always use the standard tool.
Make sure that the screws are of the right length. The lengths are different for C&P heads and the
TwinHead.
If you use the wrong screws, there is a risk of damaging the thread in the head plate. 2
.
Seal for
the head plate
Fixing
C&P 6/12
Head Reconfiguration Kits 2 Assembly Instructions - SIPLACE X-Series Head Reconfiguration Kits
07/2010 Edition
183
: Plug the DLM2 head adapter board (item no. 03019066-) from below into the head interface
board, and screw in place.
: Screw the bolts and nuts onto the adapter board before you fit it.
2
: Fit the SM board, modular (item no. 00344488-) on the DLM2 head adapter (using distance
bolts) and fix it with the corresponding screws.
Bolts
Spacer bolt, type B i/a-M3x7-ST Item no. 00324407-
Nut
DIN985 M3 - A2-70 Item no. 00328897-
Screws
DIN912 M3x6 - A2 Item no. 00201463-
Bolt with nut
Attach bolt here
Strain relief