00195166-0402_SM_D4_EN - 第144页
Service Work Modular Conveyor Overview of the Electrical Compone nts 144 Serv ice Manual SIPLACE D4 4.4.18 Overview of th e Electrical Components 4.4.18.1 Conveyor Side Conversion Board [00359424] Overview 4.4.18.2 Conve…
Service Work
Replacing the Laser Light Barriers for Stopper Positions [00370385] Modular Conveyor
Service Manual SIPLACE D4
143
Removal/Installation of transmitter module assembly
Removal /installation of receiver module
X Loosen the 2 fastening screws on the large
transmitter module (1) and the 3 fastening
screws on the small transmitter module (2).
Make sure you do not lose the O-rings.
X Unthread the connection cable as far as the
relevant conversion board of the conveyor
side.
X Unplug the conversion board of the conveyor
side.
X Reconnect the conversion board of the
conveyor side to the power supply and rerun
the connection cable accordingly.
X Fix the new transmitter module in the original
position.
X Make sure that the 3 O-rings are placed on the
3 fastening screws.
X Switch the machine on.
X Move the conveyor system to maximum width.
X Turn the 3 fastening screws to align the
transmitter diode centrally to the receiver. The
entire height of the laser beam must hit the
receiver. Please also refer to the adjustment
instructions.
1
2
X Loosen the 2 screws fastening the receiver
module (1).
X Unthread the connection cable as far as the
relevant conversion board of the conveyor
side.
X Unplug the conversion board of the conveyor
side.
X Reconnect the conversion board of the
conveyor side to the power supply and rerun
the connection cable accordingly.
X Fit the new receiver module in the original
position.
X Switch the machine on.
X Move the conveyor system to maximum width.
X Turn the 2 fastening screws to align the
receiver centrally to the transmitter diode. The
entire height of the transmitter diode laser
beam must hit the receiver. Please also refer
to the adjustment instructions.
1
Service Work
Modular Conveyor Overview of the Electrical Components
144 Service Manual SIPLACE D4
4.4.18 Overview of the Electrical Components
4.4.18.1 Conveyor Side Conversion Board [00359424]
Overview
4.4.18.2 Conveyor Conversion Board [00359425]
Overview
Legend
1. Conveyor side conversion board
2. Cover
The conversion boards for the conveyor sides (1)
are situated on the respective conveyor sides,
under a cover (2).
For terminal assignment details, please refer to
the current version of the circuit diagram folder.
1
2
Legend
1. Conveyor conversion board
2. Cover
The conveyor conversion board (1) is situated in
the vicinity of the intermediate conveyor, under the
cover (2).
For terminal assignment details, please refer to
the current version of the circuit diagram folder.
1
2
Service Work
Overview of the Electrical Components Modular Conveyor
Service Manual SIPLACE D4
145
4.4.18.3 Lifting Table Conversion Board [00362766]
Overview
4.4.18.4 Conveyor Control TSP 301 [00370397]
Overview
Legend
1. Lifting table conversion board
2. Cover
The lifting table conversion board (1) is situated on
the lifting table unit, under the cover (2).
For terminal assignment details, please refer to
the current version of the circuit diagram folder.
1
2
Legend
1. Conveyor Control TSP 301
2. Access to conveyor control
3. Transport direction
The conveyor control TSP 301 (1) is located in the
sector distributor 1 (2). The conveyor control is
secured with a screw-off cover.
For terminal assignment details, please refer to
the current version of the circuit diagram folder.