00195166-0402_SM_D4_EN - 第207页
Measuring Equipment an d T ools Scope of Delivery Belt Ten sion Device [0032601 5-01] Service Manual SIPLACE D4 207 5.6 Belt T ension Device [00326015-01] 5.7 SIPLACE Compressed Air T ester [0031 1487-01] Application: …
Measuring Equipment and Tools
Track Signal Tester [00343785-01] Scope of Delivery
206 Service Manual SIPLACE D4
5.4 Track Signal Tester [00343785-01]
5.5 Track Signal Tester [00322510-01]
Application:
The track signal tester is used to test the track
signals of the incremental measurement
system for the gantry axes (from SIPLACE
HS50).
Application:
The track signal tester is used to test the track
signals of the incremental measurement
system - particularly for the head axes. It is
also used for the track signals of the gantry
axes on older SIPLACE machines (S20, F4).
Measuring Equipment and Tools
Scope of Delivery Belt Tension Device [00326015-01]
Service Manual SIPLACE D4
207
5.6 Belt Tension Device [00326015-01]
5.7 SIPLACE Compressed Air Tester [00311487-01]
Application:
The belt tension measuring device is used to
measure the belt tensions (toothed belt) at the
machine.
Application:
The compressed air tester is used to set the air
blast at the C&P6 and C&P12 placement
heads in the SIPLACE placement machines.
Measuring Equipment and Tools
Location Tester Scope of Delivery
208 Service Manual SIPLACE D4
5.8 Location Tester
5.9 Z End Stopper Star Gauge for C&P6/12 [03019865-01]
Application:
The location tester is used to check the feeder
connections at the communication unit of the
changeover table.
Application:
The gauge is used to set the end stop position
of the C&P head Z axis.