00190867-01 - 第16页
Nachrüst anleitung Waffl epack- W echsler W PW 3 (Mitnehmer) Ausgabe/Edition 08/96 Retrofitt ing Instructions for the Waffl epack Changer W PC 3 (Driver) Seite/Page 16 von/of 20 Figure 1: Covers of the WPC 3
Nachrüstanleitung Wafflepack-Wechsler WPW 3 (Mitnehmer)
Ausgabe/Edition 08/96
Retrofitting Instructions for the Wafflepack Changer WPC 3 (Driver)
Seite/Page 15 von/of 20
• Screw the stop barrier on again.
• Connect the wafflepack changer to the SIPLACE 80F again. However, do not attach it to the SIPLACE
machine; leave it at 90° to it.
• Load the test program (see the section entitled “Required Tools and Testing Equipment”) in order to set
the zero point adjustment of the feed unit as described in the Service Instructions (section 0.4.1.1).
• Check the zero point adjustment of the feed unit once more.
• Install the front cover, the side cover and the front plexiglass cover in the reverse order to how you
removed them.
• Insert all the trays in the WPC 3 again.
• Attach the WPC 3 to the SIPLACE 80F again.
• Connect the cables of the WPC 3 to the SIPLACE 80F again.
Nachrüstanleitung Wafflepack-Wechsler WPW 3 (Mitnehmer)
Ausgabe/Edition 08/96
Retrofitting Instructions for the Wafflepack Changer WPC 3 (Driver)
Seite/Page 16 von/of 20
Figure 1: Covers of the WPC 3
Nachrüstanleitung Wafflepack-Wechsler WPW 3 (Mitnehmer)
Ausgabe/Edition 08/96
Retrofitting Instructions for the Wafflepack Changer WPC 3 (Driver)
Seite/Page 17 von/of 20
Figure 2: Feed unit, Murtfeld rail