YSM40R_KMB_mpl - 第4页
Contents KMB-1606 7 Conveyor Section Push-UP A / C ........................................... 7-1 Push-UP B / D ........................................... 7-2 T ransport ................................................…
Note
Rank A : The functions of these parts gradually deteriorate with operating time.
Rank B : The machine stops immediately if the functions of these parts are disabled.
Rank C : The machine still operates even if the functions of these parts are disabled,
because there are many parts.
Rank E : The functions of consumable part gradually deteriorate with operating time.
/ : Maintenance is excluded (The screws are also equal, display is omitted)
Level
: Aims to undergo basic maintenance training and have the capability to do the
job.
Level
r
: Yamaha Corp. aims to render exclusive training
Level
Í
: Yamaha Corp. Service Engineering
Rev.
: It had a change without the compatibility. Please be careful at the time of the
parts ordering.
Level column
Make use of these as reference, “
•
r
•×”, as mentioned in the Level column.
“
” It is based on taking the basic maintenance training, and being able to do
equal work.
“
” Please contact our company service when it is judged that the customer’s
condition difcult.
From the problem that arises from these, we cannot assume responsibility such as
accidents.
NOTE
RankA: 機能が徐々に失われる可能性のある部品。
RankB: 機能を失うとマシンの即停止に繋がる部品。
RankC: 機能を失っても複数あるのでマシンの即停止とはならない部品。
RankE: 機能が徐々に失われていく消耗部品。
／ :メンテナンス対象外（ネジ類も同等、但し表示省略）
Level
: 基礎メンテナンストレーニングを受けた方、又は同等の作業ができる方が対象。
Level
r
: ヤマハの専用トレーニングを受けた方が対象です。
Level
Í
: ヤマハのサービスマンが対象です。
Rev.
: 過去に互換性の無い変更が入った部品。部品発注時は注意してください。
Level 欄について
Level 欄に記載されている
“
•
r
•×”
はご 参 考としてご 活 用ください。
“
”
は基礎メンテナンストレーニングを受けた方、又は同等の作業ができる方を
基 準 にして おりま す。
“
”
であってもお客様が難しいとご判断された時は弊社サービスまでご連絡ください。
これらに起因する不具合、事故等についての責任は負いかねます。
Contents
KMB-1606
7 Conveyor Section
Push-UP A / C ...........................................7-1
Push-UP B / D ...........................................7-2
Transport ................................................... 7-3
Sensor .......................................................7-4
Stay / Pin Sensor ......................................7-5
Frame Assy ............................................... 7-6
Clamp Board 1 ..........................................7-7
Clamp Board 2 ..........................................7-8
Extension ..................................................7-9
8 Blow Station Section
Blow Station (Fix) ......................................8-1
9 FDR Section
Set Up ST on MC ......................................9-1
FDR Power ST ..........................................9-2
F.S. Type 100 ............................................9-3
Dust Box ...................................................9-4
10 Controller Section
Controller ................................................10-1
11 Exterior, etc. Section
Exterior, etc. 1 ......................................... 11-1
12 Tools Section
Tools ........................................................12-1
1 Base Section
Base ..........................................................1-1
Sub Assy ................................................... 1-2
2 Cover Section
Top Cover ..................................................2-1
Door ..........................................................2-2
Base ..........................................................2-3
3 Feeder Holder Section
Bank FES46 Rail Guide ............................ 3-1
Cover FES46 Moving Part ........................3-2
Cover FES46 Base / Sensor .....................3-3
Reel Holder ...............................................3-4
Carriage FES46 ........................................3-5
4 Moving-axis Section
X-axis Motor / Sensor / Cover ...................4-1
5 Head Section
Head (MU) ................................................5-1
Head Shaft Assy (MU) ..............................5-2
Head (RS) .................................................5-3
Rotary shaft Assy (RS) ..............................5-4
6 Nozzle Section
Nozzle .......................................................6-1
Nozzle Changer (Holder) RS ....................6-2
Nozzle Changer (Holder) MU ....................6-3
Nozzle Changer (Base) .............................6-4
Dump Box .................................................6-5
