00196428-0102_AI_Reconfig_Kit_X-Serie_CPP_DE EN - 第77页
Head Reconfiguration Kit 2 Assembly Instructions Head Reconfiguration Kit CPP fo r the SIPLACE X Ser ies Issue 03/2010 2.6 Replacing the P lacement Head - Pro cedure 77 2.6 Replacing the Placement Head - Procedure 2.6.1 …
2 Assembly Instructions Head Reconfiguration Kit CPP for the SIPLACE X Series Head Reconfiguration Kit
2.5 Required Parts, Tools and Consumables Issue 03/2010
76
– Tool set CPP ReConfig./x series [03082137-xx]
The tool set is only supplied once per order.
It consists of:
– Assembly instructions Head Reconfiguration Kit CPP X-Series 70X [00196428-xx]
1St Template head holding plate CPP
03059136-xx
1St
Screw locking varnish, gray
00318199-xx
4St DIN 6325 - 4m6 x 10-St
00331299-xx
1St Loctite 601
00303394-xx
1St Drill Chuck 0-6.5mm (hea index pin dism)
03075733-xx
1St Adjust Gauge Head Index Pin 4(-0,2)mm
03075779-xx
1St LOCTITE 243 Screw locking
00334892-xx
7St DIN 913 - M 4 x 6-ST
00309422-xx
Head Reconfiguration Kit 2 Assembly Instructions Head Reconfiguration Kit CPP for the SIPLACE X Series
Issue 03/2010 2.6 Replacing the Placement Head - Procedure
77
2.6 Replacing the Placement Head - Procedure
2.6.1 Installing the Placement Head - Procedure
NOTE:
This flow chart describes the basic procedure for switching between different placement
head types on X series machines with SW 70x and X tables. 2
2 Assembly Instructions Head Reconfiguration Kit CPP for the SIPLACE X Series Head Reconfiguration Kit
2.6 Replacing the Placement Head - Procedure Issue 03/2010
78
2.6.2 Removing the Placement Head - Procedure
2
NOTE:
This flow chart describes the basic procedure for switching between different placement
head types on X series machines with SW 70x and X tables. 2