00196428-0102_AI_Reconfig_Kit_X-Serie_CPP_DE EN - 第96页

2 Assembly Instructions Head Reconfiguration Kit CPP for the SIPLACE X Series Head Reconfiguration Kit 2.7 Installing the CPP Placement Head Issue 03/2010 96 X Close the cable clips. fig. 2.7.2 Flat ribbon cable at the C…

Head Reconfiguration Kit 2 Assembly Instructions Head Reconfiguration Kit CPP for the SIPLACE X Series

Issue 03/2010 2.7 Installing the CPP Placement Head

2.7.4.3 Installing the Placement Head

X Hang the placement head with its retaining bracket onto the corresponding hook at the gantry.

X Connect the two flat ribbon cables of the cable set CPP/X-Series [03074061-xx] to the con-

version board PCB/Head adapter CPP/A364 [03077980-xx]. Depending on the camera type,

this is not possible after the head screws have been tightened.

CAUTION:

The left cable at the head belongs to the bottom plug at the head adapter. The right cable

at the head belongs to the top plug at the head adapter. The cables are "intertwined".

Otherwise the machine stops with an error during startup. In some cases, machine parts

may be destroyed. 2

2 Assembly Instructions Head Reconfiguration Kit CPP for the SIPLACE X Series Head Reconfiguration Kit

2.7 Installing the CPP Placement Head Issue 03/2010

X Close the cable clips.

fig. 2.7.2 Flat ribbon cable at the CPP (here with camera type 28)

X Slightly lift off the placement head (0.5 mm), so that the head engages in its final position, and

hold it in this position.

X Tighten the 4 screws of the placement head.

Make sure to use the correct height, the correct screw lengths and the correct torque.: DIN912

M4x18 - 8.8 [00095023-xx], torque: 2.7 N

Close the cable

clips

Connect the top

and bottom plug

at the head

adapter

Connect the left and right plug at the head

Head Reconfiguration Kit 2 Assembly Instructions Head Reconfiguration Kit CPP for the SIPLACE X Series

Issue 03/2010 2.7 Installing the CPP Placement Head

X Connect the two plugs of the component camera.

X Position the securing bracket in place and fix them with the screws.

X Close the cable clip.

Closing the cable clip

Connecting the plugs

Securing brackets