YSi-X_HD_mpl - 第4页
Contents KLC-1308 6 Conveyor Section MS-Drive ................................................... 6-1 MS-ARM / Duct ......................................... 6-2 T ransport ...............................................…
Note
Rank A : The functions of these parts gradually deteriorate with operating time.
Rank B : The machine stops immediately if the functions of these parts are disabled.
Rank C : The machine still operates even if the functions of these parts are disabled,
because there are many parts.
Rank E : The functions of consumable part gradually deteriorate with operating time.
/ : Maintenance is excluded (The screws are also equal, display is omitted)
Level
: Aims to undergo basic maintenance training and have the capability to do the
job.
Level
r
: Yamaha Corp. aims to render exclusive training
Level
Í
: Yamaha Corp. Service Engineering
Rev.
: It had a change without the compatibility. Please be careful at the time of the
parts ordering.
Level column
Make use of these as reference, “
•
r
•×”, as mentioned in the Level column.
“
” It is based on taking the basic maintenance training, and being able to do
equal work.
“
” Please contact our company service when it is judged that the customer’s
condition difcult.
From the problem that arises from these, we cannot assume responsibility such as
accidents.
NOTE
RankA: 機能が徐々に失われる可能性のある部品。
RankB: 機能を失うとマシンの即停止に繋がる部品。
RankC: 機能を失っても複数あるのでマシンの即停止とはならない部品。
RankE: 機能が徐々に失われていく消耗部品。
／ :メンテナンス対象外（ネジ類も同等、但し表示省略）
Level
: 基礎メンテナンストレーニングを受けた方、又は同等の作業ができる方が対象。
Level
r
:ヤマハの専用トレーニングを受けた方が対象です。
Level
Í
: ヤマハのサービスマンが対象です。
Rev.
: 過去に互換性の無い変更が入った部品。部品発注時は注意してください。
Level 欄について
Level 欄に記載されている
“
•
r
•×”
はご参考としてご活用ください。
“
”
は基礎メンテナンストレーニングを受けた方、又は同等の作業ができる方を
基準にしております。
“
”
であってもお客様が難しいとご判断された時は弊社サービスまでご連絡ください。
これらに起因する不具合、事故等についての責任は負いかねます。
Contents
KLC-1308
6 Conveyor Section
MS-Drive ...................................................6-1
MS-ARM / Duct .........................................6-2
Transport ...................................................6-3
Clamp Board F ..........................................6-4
Clamp Board R .........................................6-5
Side Frame FL / FR ..................................6-6
Side Frame RL / RR ..................................6-7
Side Clamp ...............................................6-8
Duct HNS.-Valve .......................................6-9
Conv.-Sensor Assy ..................................6-10
Cover ...................................................... 6-11
7 Controller Section
Controller ..................................................7-1
8 Exterior, etc. Section
Exterior, etc. ..............................................8-1
9 Tools Section
Tools ..........................................................9-1
1 Base Section
Base ..........................................................1-1
2 Cover Section
Upper Cover. ............................................. 2-1
Lower Cover ..............................................2-2
Door Cover. ...............................................2-3
3 Moving-axis Section
XT-Motor / Sensor ..................................... 3-1
YT-Motor / Sensor ..................................... 3-2
4 X-Ray Head Section
Motor / Sensor ..........................................4-1
5 Vision Camera Section
Camera Head ............................................5-1
HS-axis / Sensor .......................................5-2
Duct ...........................................................5-3
