00198051-01_IM_SetupCenter_8.0_EN - 第3页

Inhaltsverzeichnis Installation Manual SIPLACE Setup Center 8.0 3 T a b le o f C o n t e n t s 1 Introduction 7 1.1 Explanation of symbols 7 2 Navigation Guide for Installation 9 2.1 SIPLACE Setup Center 9 3 System Compo…

100%1 / 112
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
We have reviewed t he contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be
precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary
connections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 München
Germany
Item no.: 00198051-01
www.siplace.com Printed by ASM Assembly Systems
Inhaltsverzeichnis
Installation Manual SIPLACE Setup Center 8.0 3
Table of Contents
1 Introduction 7
1.1 Explanation of symbols 7
2 Navigation Guide for Installation 9
2.1 SIPLACE Setup Center 9
3 System Components and Configurations 11
3.1 System Components 11
3.1.1 Setup Center 11
3.1.2 Scanner System 11
3.1.2.1 Datalogic Scanner 11
3.1.2.2 Motorola / Symbol 12
3.1.3 Forced Setup Verification 12
3.1.4 Docking Station E-,X- and SX 12
3.1.5 FillingStations for SIPLACE Bulk Feeder X 12
3.2 System Configuration 12
3.2.1 SIPLACE Pro 12
3.2.2 Setup Center Database 13
3.2.3 Setup Center GUI 13
3.2.4 Forced Setup Verification 14
3.2.5 Docking Stations 14
3.2.6 Recommended Installation Scenarios 14
3.2.6.1 Local Database 14
3.2.6.2 Central Database 15
4 Important Preparations 17
4.1 Operation System Installation 17
4.2 Database Installation 17
5 Setup Center Application Installation 19
5.1 General Settings 19
5.2 Individual Setup Types and Next Steps 25
5.2.1 Setup Type – SIPLACE Setup Center Complete 25
5.2.2 Setup Type – SIPLACE Setup Center GUI 32
5.2.3 Setup Type – SIPLACE Setup Center Server 36
5.2.4 Setup Type - Custom 44
5.3 Setup Verification and Traceability Activation 46
5.3.1 Installing 46
6 Barcode-Scanner Installation 51
6.1 Safety Instructions 51
6.2 Datalogic Scanner 52
6.2.1 Datalogic Scanner’s Cradle BC-8030 (Narrowband) 52
6.2.1.1 Connect cradle via RS-232 52
6.2.1.2 Connect cradle via USB 54
6.2.2 Datalogic Scanner`s Cradle BC-9030 (Narrowband) 56
6.2.2.1 Connect cradle via RS-232 57
6.2.2.2 Connect cradle via USB 58
6.2.3 Datalogic Scanner’s Cradle BC-8030-BT (Bluetooth) 59
6.2.3.1 Connect cradle via RS-232 59
6.2.3.2 Connect cradle via USB 60
6.2.4 Datalogic Scanner Configuration 61
Inhaltsverzeichnis
4 Installation Manual SIPLACE Setup Center 8.0
6.2.4.1 Verify the Firmware Status for the Datalogic Scanner 61
6.2.4.2 Firmware Upgrade of Datalogic Scanner 62
6.2.5 Datalogic Scanner Connection 67
6.2.6 Installation of the USB-COM driver 67
6.3 Motorola Scanner 69
6.3.1 System Requirements 69
6.3.2 Configurate WLAN on Scanner 69
6.3.3 Mobile Scanner Prerequisites Setup 70
6.3.3.1 Step 1: Mobile Device Center 71
6.3.3.2 Step 2: AppCenter 71
6.3.4 Setup Center Client Installation 74
6.3.5 Motorola / Symbol Scanner Configuration 77
6.3.5.1 Configurate WLAN network 77
6.3.5.2 Configure Setup Center Client 77
6.3.5.3 Establishing Connection 79
6.3.5.4 SIPLACE Scanner Config Tool 79
7 Docking Station Installation 83
7.1 Safety Instructions 83
7.2 Connections on the Docking Station 83
7.2.1 CAN Bus Address of the Docking Station 83
7.2.2 Data Connection of the Docking Station 84
7.2.3 Compressed Air and Power Supplies 85
7.3 Data Connection with PC-CAN Card 87
7.3.1 Installing the CAN Card in the PC 87
7.3.2 Connection Examples with PC-CAN Card 88
7.3.3 Installing the CAN Bus driver and API 90
7.4 Data Connection with CIN-Box 94
7.4.1 Overview CIN-Box 94
7.4.2 Installing the CIN-Box driver 95
7.4.3 Establishing a Data Connection 96
7.4.4 Connection Examples with CIN-Box 97
7.5 Firmware Download for Feeder Control Unit 98
8 FillingStation Installation 99
8.1 Connections on the FillingStation 99
8.2 Connection Examples 100
9 Settings 101
10 Modify 103
10.1 Modify Setup Center 103
10.2 Modify Forced Setup Center 103
11 Uninstalling 105
11.1 Backup Configuration Files 105
11.2 Uninstalling Setup Center GUI 105
11.3 Uninstalling Setup Center Database 105
11.3.1 Uninstalling SQL Server Express Installations 106
11.4 Uninstalling Forced Setup Verification 106
11.5 Optional: Uninstalling the SIE MultiThread API SIECA 132 Software Package 106