00198051-01_IM_SetupCenter_8.0_EN - 第71页
Barcode-Scanner Installation 6.3.3 Mobile Scanner Prerequisites Setup Motorola Scanner Installation Manual SIPLACE Setup Center 8.0 71 6.3.3.1 6 . 3 . 3 . 1 S t e p 1 : M o b ile D e v ic e C e n t e r Step 1: Mobile Dev…
Barcode-Scanner Installation
Motorola Scanner 6.3.3 Mobile Scanner Prerequisites Setup
70 Installation Manual SIPLACE Setup Center 8.0
6.3.3
6.3.3 Mobile Scanner Prerequisites Setup
Mobile Scanner Prerequisites Setup
The installation for mobile scanner prerequisites setup is located on the DVD "SIPLACE Support Media
DVD1" in the Selective Installation section.
► Open SIPLACE Products (1).
► Execute the Mobile Scanner Prerequisites (1) setup.
Barcode-Scanner Installation
6.3.3 Mobile Scanner Prerequisites Setup Motorola Scanner
Installation Manual SIPLACE Setup Center 8.0 71
6.3.3.1
6.3.3.1 Step 1: Mobile Device Center
Step 1: Mobile Device Center
The Mobile Scanner Prerequisites Setup checks if the necessary communication program (Mobile De
-
vice Center) is present.
If Windows Mobile Device Center is not installed on the system, the following message box appears.
► Select “Yes” to start the installation of Mobile Device Center. Make sure that the scanner is not yet
connected to the basic station.
If Windows Mobile Device Center is not installed on the system, the installation of Mobile Device Center
will be executed. Make sure that the scanner is not yet connected to the basic station.
Install Mobile Device Center
► The installation of Mobile Device Center is beginning.
► Confirm with "OK".
See also
6.3.3.2 Step 2: AppCenter [ ➙ 71]
6.3.3.2
6.3.3.2 Step 2: AppCenter
Step 2: AppCenter
NOTICE
In case of an upgrade installation exit the Symbol AppCenter before you start with the installa
-
tion procedure.
► Exit AppCenter with "Tools → Exit…".
► Enter the defined AppCenter password, to confirm exit (default value is "odyssey").
Barcode-Scanner Installation
Motorola Scanner 6.3.3 Mobile Scanner Prerequisites Setup
72 Installation Manual SIPLACE Setup Center 8.0
Steps on Setup Center computer
Place the scanner in its cradle if this has not already been done. The installation program automatically
detects the scanner type (Device type) and lists the necessary software packages for the installation.
► Click on Install to start the installation of the software packages.
► Please put the scanner into cradle, and press Continue to start the installation of Symbol AppCenter.
The transfer of the components to the scanner is beginning.
NOTICE
Once the ActiveSync is installed on the Setup Center computer rerun the “Mobile Scanner Pre
-
requisites Setup” from the support Media DVD. The following dialog appears.
NOTICE
The installation program checks if the firmware version of the scanner complies with the mini
-
mum requirement. If this is not the case, update your scanner firmware first.