00198545-01_JCPM_WF2_CA4V2_EN - 第25页
6 WF2 CA4 V2 Clean the Z-Axis of the remaining C&P20 A/P/M2 head 2 min 1 / 1 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a…
5 WF2 CA4 V2 Return a maintained C&P20 M2 head 8 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T7, T8, T9, T15, T19, T49, T62
Wear Part: Consumables:
C8
www.asm-smt.com
7 Close the strain relief. 8 Connect the three air hoses. 9 Remove the component sensor protection.
6 WF2 CA4 V2 Clean the Z-Axis of the remaining C&P20 A/P/M2 head 2 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T3, T20
Wear Part: Consumables:
www.asm-smt.com
1 Move all gantries to the end limit. 2 Area of the remaining head(s) to be
cleaned.
3 Remove any components from the Z-Axis.
4 If OK → next job.
www.asm-smt.com