00198545-01_JCPM_WF2_CA4V2_EN - 第26页
www.asm-smt.com
6 WF2 CA4 V2 Clean the Z-Axis of the remaining C&P20 A/P/M2 head 2 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T3, T20
Wear Part: Consumables:
www.asm-smt.com
1 Move all gantries to the end limit. 2 Area of the remaining head(s) to be
cleaned.
3 Remove any components from the Z-Axis.
4 If OK → next job.
www.asm-smt.com
7 WF2 CA4 V2 Check and clean the magnetic surface and scale of the X- and Y-
Axis
5 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T3
Wear Part: Consumables:
C3, C5
www.asm-smt.com
1 Move all gantries to the end limit at loca-
tion 2/4.
2 Check the X-Axis magnets at gantry 1/3
(2/4) for contamination and damage.
3 If you see any damage contact service.
4 If OK -> clean the X-Axis magnets at
gantry 1/3 (2/4).
5 Clean the X-Axis Scale at gantry 1/3 (2/4). 6 Check the Y-Axis magnets at gantry 1/3
(2/4) for contamination and damage.