00198545-01_JCPM_WF2_CA4V2_EN - 第30页
www.asm-smt.com
8 WF2 CA4 V2 Clean the conveyors, lifting tables and gantry cables 5 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T1
Wear Part: Consumables:
C3
www.asm-smt.com
1 Clean all X-Axis gantry cables at gantry
1/3.
2 Clean all Y-Axis gantry cables at gantry
1/3.
3 Move all gantries to the end limit at loca-
tion 2/4 and repeat steps 1 to 2 for gantry
2/4.
4 Vacuum all loose components on and
around the whole PCB conveyor.
www.asm-smt.com
9 WF2 CA4 V2 Clean / replace the cooling air filter 2 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part:
W26
Consumables:
C19
www.asm-smt.com
1 The air filter is positioned at the side of
location 3.
2 Open the door (1), unscrew the wing nut
(2) and remove the filter (3).
3 Blast the dirt out.
4 Check if it is clean. 5 If OK go to Step 7. 6 If not OK replace it with a new one.