00198545-01_JCPM_WF2_CA4V2_EN - 第36页
www.asm-smt.com
11 WF2 CA4 V2 Clean the feeder modules and cut the tapes 3 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
1 Vacuum all loose components from the
feeder modules.
2 Cut the remaining tape directly at the
feeder.
3 Ensure to leave 2 holes overlap when cut-
ting.
4 Repeat steps 1-3 at all feeder tables.
www.asm-smt.com
12 WF2 CA4 V2 Switch on the machine and return the changeover tables (COT) 6 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
1 Switch on the machine. 2 Return the COT. 3 Close the cover.
4 If open: close the sliding door. 5 Press the COT button to dock the COT.