20121120111955_KY8030_2_Maintenance_Manual_Eng_ver1 - 第20页
20 | KY -8030 2 3D Solder Paste Inspec tion System V ersion 1.0 K OH Y OUNG T ECHNOLOGY I NC . 1. P RODUCT /P ARTS C ONTROL AND I NSPECTION 1.1. Items of Regular Inspection Unit Item Check/Maintenance Maintenan…
Maintenance Manual | 19
TRADEMARKS
©Copyright2005‐2009KohYoungTechnologyInc.Allrightsreserved.
The product names used in this manual are the registered trademarks of their respective
companiesandprotectedbyrelevantpatentandcopyrightlaws.
¾ KohYoung Technology Inc., KY‐80302, 3D Inspection, and ePM‐SPIare theregistered
trademarks
ofKohYoungTechnologyInc.
¾ WindowsandWindowsXParetheregisteredtrademarksofMicrosoftCorporation.
ItisprohibitedtoduplicateallorpartofthismanualwithoutconsentofKohYoungTechnology
Inc.
Theproductspecificationmaybechangedwithoutpriornotice.
20 | KY-8030 2
3DSolderPasteInspectionSystem
Version 1.0
KOH YOUNG TECHNOLOGY INC.
1. PRODUCT/PARTS CONTROL AND
INSPECTION
1.1. Items of Regular Inspection
Unit Item Check/Maintenance
Maintenance Cycle
Every
Operation
Every
Month
Every
3Month
Every
6Month
Power
and S/W
Main
Power
S/W
Panel
Main Power ON/OFF O
E/Stop and Safety Sensor
operation
O
Switch operation O
Air
Pressure
Controller
Air
Pressure
UNIT
Filter blockage O
Moisture filtration O
Supplied Air Pressure O
Air leakage O
Solenoid valve operation O
Cylinder operation O
X-Y Axis
Sensor Limit Sensor operation O
LM Guide
Smooth movement in the
overall Stroke
O
Grease lubrication O
Coupling
Damage and disengagement
of Coupling
O
Ball
Screw
Movement in the overall Stroke O
Grease lubrication O
Loosened Support Unit O
Loosened Screw Nut O
Cable
Parts
Noise from Cable Bear
operation & Cable condition
O
Wear and tear of Cables and
junction of the Connectors
O
Operation Abnormal noise/vibration O
Maintenance Manual | 21
Unit Item Check/Maintenance
Maintenance Cycle
Every
Operation
Every
Month
Every
3Month
Every
6Month
X-Y Axis
X-Y
Frame
Loosened Bolt or System
Position Deviation
O
Conveyor
Ring
Belt
Ring Belt Motor noise
/operation
O
Wear and tear of Belts O
Belt tension O
Connection of Belts O
Roller
Wear and tear of Roller,
Connection with Belts
O
PCB
Smooth movement of PCB O
Obstructions during PCB
transfer
O
Movement when Manually
setting width
O
Manual width setting
Clamping operation
O
Distance between two ends
when adjusting width
O
Sensor
PCB detection and
measurement
O
Stopper
Up/Down movement of
Cylinder Stopper and PCB
stoppage
O
Height
Guide
Operation of Height Guide
Cylinder
O
Distance of Edge Clamp O
Up
/Down
Up/Down movement of
Cylinder
O
Up/Down Sensor operation O
Up/Down speed O
PCB clamping state for
different thickness
O