KE-3010_SPE_EN - 第15页

- 10 - 4.2. Mechanical/Electri cal Specifications 4.2.1. Usage environment c onditions KE - 3010/3020V/ 3020VR Power supply V oltage Three - pha se 200V , 220V , 240V , 380V , 400V , 415V AC ± 10% ( See Note 1 ) Frequenc…

- 9 -

② The relationship among the model names, recognition devices and heads is shown below.

KE-3010

KE-3020V

KE-3020VR

Explanation

LNC60 ○ ○ ○

This can place small-shape and thin chips at a

high speed by 6 nozzles.

head

(CDS)

- ○ -

This head can place IC components of

large-shape QFP, CSP, BGA, etc. by vision

recognition.

head

(FMLA)

- - ○

This head can place components by laser

recognition and vision recognition. All types of

nozzles such as gripper nozzle and particular

ordering nozzle can be used for the IC head

(FMLA).

VCS

* See

Note 1.

○ ○

VCS can perform vision recognition of IC

components. An optional high-resolution camera

can be added.

*Note 1: The standard camera is attached to MNVC (option). The high-resolution camera is

also attached.

③ Recognition function

KE-3010 KE-3020V KE-3020VR Explanation

MNVC Option

○ ○

Vision recognition can be performed by LNC60.

IC components of small-shape QFP, CSP, BGA,

etc. can be placed at a high speed. Vision

recognition can be performed by VCS in the

high-speed non-stop mode. (S-VCS)

- 10 -

4.2. Mechanical/Electrical Specifications

4.2.1. Usage environment conditions

KE-3010/3020V/3020VR

Power supply

Voltage

Three-phase 200V, 220V, 240V, 380V, 400V, 415V AC ±10% (See

Note 1

)

Frequency 50/60Hz

Rated apparent power 2.2kVA

Air supply

Air pressure

0.5±0.05 MPa dry air

Maximum air

consumption

50L/min (ANR) (See Note 2)

Environment

requirements

During operation

Ambient temperature

+ 10 to + 35 °C

Placement accuracy

guarantee temperature

+ 20 to + 25 °C

Relative humidity

30 % to 80% RH (No condensation)

Altitude 1,000m or less

During transportation

or storage

Ambient temperature

- 15°C to + 70°C

Relative humidity

20 % to 95% RH (No condensation)

Noise

73 dB (A) or less (See Note 3)

Installation

conditions

(for a EN

machine)

Overvoltage category Category III according to IEC60664-1

Pollution degree Degree 3 according to IEC60664-1

Note 1: No power supply cable at the primary side is attached thereto.

We make NO WARRANTIES against any accident of the primary side wiring caused by

short–circuit of the power cable and so on. Please use a 5.5-mm

or more diameter of

power cable for each phase. (Note: the appropriate cross-section area of the cable varies

depending on the supplied power voltage and the length of the power cable.)

Cable length

(m)

Conductor cross section (mm

)

200Vseries 400Vseries

Less than 20 5.5 5.5

30 8.0 5.5

10.0

6.0

14.0

6.0

・Peak current (at AC200V 3phase power) : 40A

Note 2: ANR conditions are as follows:

Temperature = 20°C,

Absolute pressure = 0.1MPa (=100kPa=1bar),

Relative humidity = 65%

Note 3: This value was measured with conforming to the JIS Z8731 regulation.

- 11 -

4.2.2. Outside dimension (except for the largest projections)

(Unit: mm)

PWB specification

Dimensions

M PWB L PWB L-Wide XL PWB

A (transport length) 1,500 1,500 1,800 2,131

C (depth:

excluding LCD)

1,580 1,690 1,690 1,890

H (transport output

amount)

50 50 200

228.6（L）

222.4(R)

* The tolerance of the above dimensions is ±15 mm.

(Unit: mm)

Transport height

Dimensions

900mm 950mm

B (Top surface of the transport belt from the floor) 900 950

D (Bottom of the keyboard from the floor) 936 986

E (Top surface of the cover from the floor) 1,500 1,550

G (Top surface of the signal light from the floor) 1,970 2,020

F (PWB transport path from the front side of the

cover)

484 484

* The tolerance of the above dimensions is ±5 mm.

4.2.3. Mass

(Unit: kg)

PWB specification

Model

M PWB L PWB XL PWB

KE-3010/3020V/3020VR 1,850 1,900 2,250

(90)