KE-3010_SPE_EN - 第47页

- 42 - 5.2.27. Multi - code Reader / Bottom view t yp e Multi - code Reader ( Factory - Set Option ) Th is is an option that reads a P W B code ( B a rcode or 2 - D code) w ith one sensor . It is to be used with the IFS …

- 41 -

5.2.26. Rotary-type Solder Device (Factory-Set Option)

This device transfers solder onto a ball-terminal component such as a BGA, a CSP and a flip

chip.

You can adjust the thickness of solder to be transferred with the squeegee installed on the

solder tray.

ecommended solder paste

M705-TVA Series (Senju Metal Industry Co., Ltd.) (Viscosity: 30 Pa·s)

pplicable components

Component dimensions: 14 mm×14 mm or less

Ball diameter: 0.36 mm or more

Ball pitch: 0.5 mm or more

older application specifications

Thickness of solder: 40 μm or more

Where to install>

Installation position Remarks

To be attached on a bank

(Front side only)

To attach the device on a bank, see the figures desc

ribed below for the number of

component supply devices that can be installed on the machine.

Mechanical bank

The area for six mechanical 8-mm tape feeders (12 slots) is

to be occupied. (A connector bracket is required.)

Electric bank

The area for six electric 8-

mm tape feeders (6 slots) is to be

occupied.

Note1: Either a fluxer or a rotary-type solder transfer unit option can be installed on the machine.

Note2: It does not correspond to the Feeder exchange trolley RF.

Item

Specifications

Remarks

Type

For a mechanical

bank

SWR1MB

For an electric bank SWR1EB

Total weight

For a mechanical

bank

3.2kg

For an electric bank

4.4kg

Transfer position

One position

Cycle time obtained when a

solder is transferred and a

component is placed on a board

1180cph

Power consumption 1.5 W (100 V AC/15 mA)

Parts to be replaced on a regular

basis

Squeegee

To be replaced when it is chipped,

worn out or deformed.

- 42 -

5.2.27. Multi-code Reader / Bottom view type Multi-code Reader (Factory-Set

Option)

This is an option that reads a PWB code (Barcode or 2-D code) with one sensor. It is to be

used with the IFS-NX software and so.

Attach a multi-code reader on the head section to read a code on the surface of a board.

Attach a bottom view multi-code reader on the conveyor (under the IN buffer board waiting

position) to read a code on the bottom side of a board.

Note: A multi-code reader/Bottom view type multi-code reader does not support a placement

monitor.

5.2.28. Software to support production (Option)

(1) EPU (External Programming Unit)

This is software for creating a production program for KE-3000 series on a personal

computer (PC). The screen displayed on a PC is exactly same as that of the machine.

Even while a machine is running productions, you can edit a production program and

manage a database on a PC with this software.

(2) Flexline CAD

With this software you can convert text data files in ASCII format and production

programs created with a CAD system for other manufacture’s machines to the JUKI

format. This permits reducing the production program creating time and transferring data

smoothly from the line of another company.

For

detailed information on converting data from other manufacture’s machine, pleas

ontact JUKI or the representative office in your area.

(3) IS (Intelligent Shopfloor Solutions) : Production support system

In addition to the functions of HLC and SCS, IS allows you to obtain information on the

whole shop floor to optimize and manage the production collectively. This comprehensive

management system supports you to reduce cost, and to improve productivity and

product quality effectively. The ”Board viewer” function is equipped as a standard feature.

Also a production plan for a whole shop floor can be created.

* For

details of IS, refer to “IS PRODUCT SPECIFICATIONS”.

(4) IFS-NX (Intelligent Feeder System) : Production management system

IFS-NX can use alone a software without the production support system.

It uses barcodes, 2-D codes and a multi-code reader to perform quality control operations

such as “prevention of a component placement error” and “traceability,” “improve the

workability of preparations” and “manage the number of the remaining components.”

To authenticate a feeder or a tray supply unit, you can select a barcode or an RFID.

When you use a component supply unit that supports an RFID, operation such as

verification and management can be automated, so that the quality control and working

efficiency are improved drastically.

* To use a function of IFS-NX, all of a mounter main unit, a feeder exchange trolley, each

type of feeder, and a tray supply unit have to support an RFID. If you use any

conventional device, contact our Sales staff.

* Refer to the “IFS-NX PRODUCT SPECIFICATIONS” for details of the IFS-NX.

(5) IS Lite : Production management system

Juki software, the IS, has been simplified to develop the IS Lite. This software

consolidates and optimizes information on JUKI mounters allocated on the whole a line

(production site) to improve productivity and to reduce production cost of each line.

Applicable models : RX-6 series, RX-7, KE-3000 series, FX-3 series,

KE-2070/80 series, KE-2050/60 series

- 43 -

(6) JaNets : Production support system

As with our software IS and IS Lite, This software consolidates and optimizes information

on JUKI mounters allocated on the several lines (production site) to improve productivity

and production quality and to reduce production cost of each line.

Applicable models : RS-1, RX-7, RX-6 series, KE-3000 series, FX-3 series, KE-2070/80

series, KE-2050/60 series, KD-2077

* For

line configuration that the RS-1 is located, JaNets is required.