KE-3010_SPE_EN - 第49页
- 44 - 6. Compone nt s upply unit 6.1. List of Feeder Bank Specifi cations A bank is selected from fiv e types shown below , which supplies component s. It is possible to combi ne with a fr o nt bank and /or a rear bank …
- 43 -
(6) JaNets : Production support system
As with our software IS and IS Lite, This software consolidates and optimizes information
on JUKI mounters allocated on the several lines (production site) to improve productivity
and production quality and to reduce production cost of each line.
Applicable models : RS-1, RX-7, RX-6 series, KE-3000 series, FX-3 series, KE-2070/80
series, KE-2050/60 series, KD-2077
* For
line configuration that the RS-1 is located, JaNets is required.
- 44 -
6.
Component supply unit
6.1. List of Feeder Bank Specifications
A bank is selected from five types shown below, which supplies components.
It is possible to combine with a front bank and/or a rear bank according to your usage.
Bank type Attachable feeder type
Attachable feeder exchange
trolley
①
Mechanical feeder bank (fixed
type)
Mechanical feeder
-
②
Electric feeder bank (fixed type) Electric feeder
-
③
Mechanical feeder bank feeder
exchange trolley type
Mechanical feeder
Mechanical feeder exchange
trolley only
④
Electric feeder bank feeder
exchange trolley type
Electric feeder
Electric feeder exchange trolley
only
⑤
Mechanical feeder bank and
electric feeder bank feeder
overall change table cart
combined system
Mechanical feeder
Electric feeder
Mechanical feeder exchange
trolley
Electric feeder exchange trolley
* Compatibility of our mounter KE-2010/2020/2040 mechanical type feeder bank
For installing the KE-2010/2020/2040 overall change table cart in the mechanical/electric
feeder bank overall change table cart combined system (No.⑤) of this model, an adapter
component is separately requited.
When installing it in the mechanical type overall change table cart (No.③), no adapter
component is required.
* C
ompatibility of the electric feeder bank of our mounter KE-3020/3020R
For setting the electric change table card for this model in KE-3020/20R, a modification kit is
required depending on conditions.
- When there is a cutter unit in KE-3020/3020R
→ A modification kit is required.
- When there is no cutter unit in KE-3020/3020R
→ A modification kit is not required.
For setting the change table cart of KE-3020/20R in this model, no modification kit is
required.
- 45 -
6.2. Maximum Number of Feeders Available on a Mounter
(1) Mechanical feeders
Name
The number of
feeders available
on the front side
The number
of feeders
available on
the rear side
Total number
of feeders
available
The number
of slots
occupied
Mounting
pitch
8 mm tape feeder 40 40 80 (80 types) 2 17.0 mm
12 mm tape feeder
26 26 52 3 25.5 mm
16 mm tape feeder
26 26 52 3 25.5 mm
24 mm tape feeder
20 20 40 4 34.0 mm
32 mm tape feeder
16 16 32 5 42.5 mm
32 mm paper adhesive
tape feeder
16 16 32 5 42.5 mm
44 mm tape feeder 10 10 20 8 68.0 mm
56 mm tape feeder 10 10 20 8 68.0 mm
72 mm tape feeder 8 8 16 10 85.0 mm
Stick feeder type N 26 26 52 3 25.5 mm
Stick feeder type W 13 13 26 6 51.0 mm
Stack stick feeder
(Note 1)
5 ― 5 8 68.0 mm
Bulk feeder
40 ― 40 2 17.0 mm
Note 1: The number of feeders that can be installed on the front side is up to five.
(
2) Electric feeders
Name
The number of
feeders
available on the
front side
The number
of feeders
available on
the rear side
Total number
of feeders
available
The number
of lanes
occupied
(*1)
Mounting
pitch
4 mm tape feeder
40
40
80 (80 types)
1
17.0 mm
8 mm tape feeder
40
40
80 (80 types)
1
17.0 mm
8 mm double lane tape
feeder
(*2)
40 40 80 (160 types) 1 17.0 mm
12 mm tape feeder
40 40 80 1 17.0 mm
16 mm tape feeder
20 20 40 2 34.0 mm
24 mm tape feeder
20 20 40 2 34.0 mm
32 mm tape feeder
13 13 26 3 51.0 mm
44 mm tape feeder
13 13 26 3 51.0 mm
56 mm tape feeder
10 10 20 4 68.0 mm
72 mm tape feeder (*3)
6 6 12 5 85.0 mm
88 mm tape feeder (*3)
5 5 10 6 102.0 mm
Stick feeder type N (*4)
20 20 40 2 34.0 mm
Stick feeder type W (*4)
13 13 26 3 51.0 mm
*1: One lane occupied by electric feeders is mostly equivalent to two slots occupied by mechanical feeders.
*2: To use an 8 mm double lane tape feeder, be sure to use a tape reel attaching platform for electric feeder.
*3: Since five lanes on each side of the bank, left and right are not to be used, the number of lanes shown in
the table above can be used.
*4: Attach the RF_ETF_Attachment when Stick feeders are used by a feeder trolley (RF)