KE-3010_SPE_EN - 第77页
- 72 - 10. Reliability spec ifications 10.1. Lifetime of d evices For f ive ( 5 ) years ： Excl uding either the consumable components or the following r egularly replaceable components. Refer to t he Instruction Manual f…
- 71 -
9.
Safety specifications
9.1. Standards specifications
Emergency stop
The machine is provided with the two (2) emergency stop buttons each at the front and rear
sides. (The one (1) emergency stop button is provided when the optional HOD is attached on
the machine.) Depressing these emergency stop buttons immediately stops each axis to cut
off the power supply for driving the motors.
Safety covers
The machine is provided with covers, each at the front and rear sides, for both of which the
cover open switch detects either status of opening or closing to suspend the continuous
operation temporarily upon opening either cover or both. Moreover, the machine is
provided with the "Switching key" on the operation panel that switches "Maintenance
mode" or "Operation mode" to perform switching operation of safety covers according to
each mode.
･ Operation mode
It is a mode that enables a safety cover to be locked, and limits opening of cover during
normal production. Moreover, it releases the safety cover from being locked in operation,
and frees the servomotor "SERVO FREE state" for the safety operation while the safety
cover opens.
･ Maintenance mode
It is a mode that enables the low-speed operation while a safety cover is not locked and
opened, and is used for maintenance.
9.2. Specifications for the CE Marking (for EN Machine)
This shall comply with the following EC (European committee) instructions
− EC mechanical instructions： 2006/42/EC
− EC EMC instructions： 2004/108/EC
Applicable standard
・Machinery Directive EN ISO12100:2010, EN ISO13849-1:2008, EN 60204-1: 2006, others
・EMC Directive EN 61000-3-2: 2006, EN 61000-3-3: 1995/A1: 2001/A2: 2005,
EN 61000-3-11: 2001, EN 61000-6-4: 2007, EN 55016-1-2 : 2004,
EN 55016-2-1: 2004, EN 55016-2-3 : 2006, EN 61000-6-2: 2005,
EN 61000-4-2: 1995/A1: 1998/A2: 2001, EN 61000-4-3: 2006,
EN 61000-4-4: 2004, EN 61000-4-5: 2006, EN 61000-4-6: 2007,
EN 61000-4-8: 1998, EN 61000-4-11: 2004
- 72 -
10.
Reliability specifications
10.1. Lifetime of devices
For five (5) years： Excluding either the consumable components or the following regularly
replaceable components.
Refer to the Instruction Manual for the details.
− Periodic replacement parts: These must be replaced at intervals of 2 to 3 years as standard.
(The replacement interval varies depending on the operating conditions.)
Criteria for calculating the lifetime
：
22 hours per day
300 days per year
Therefore, 22 x 300 x 5 = 33,000 hours/5 years
Cableveyor
Bare cable assembly
Air tube
Optical fiber cable (in a plastic rail)
1394 robot cable assembly
Magnetic scale wiper
Filter element
Gas spring
Battery unit
Mouse
HOD
Cutter unit
Electric feeder IF cable assembly
Ionizer (electrode section)
◆
Revision record
Rev. Date Revised locations Revision contents Remarks
00 Dec.2011 First Edition
01 Feb.2012 P-2,5,6,7,15,28,35,46,47,48,49,50 Supported TR7DN. Revised
02 May.2012
P-1～8,12,15,16,18,19,26, 31,32,
33,37,39～42,62
Supported Placement
Monitor ,Rotary-type
Solder Device and
Multi-code Reader /
Bottom view type
Multi-code Reader
Revised
03 Sep.2012 P1,3,6,7,39,42,44-53,63,64
Supported ETF72/88mm,
Multi die server and
IFS-NX Ver2.00.
Revised
03a Dec.2012 P4,8,32 Corrected Revised
04 Dec.2013 P68 Revised Spec. Revised
05 Aug. 2016 Fully revised
Support of RF series
Electric feeder
Revised
06 Jun. 2017 Fully revised
Support of JaNets
Ver8.00A
Revised
07 Jan. 2018 Fully revised Support of Ver8.20A Revised