00191297-02 - 第106页

3 Introduction and Ba sic Concepts User Manual SIPLACE S-23 HM 3.3 User Interface - Views and Menus Software Version SR.405.xx 05/99 Issue 104 Start SITESTF1 1 3 This autom atical ly starts the SITEST t est pr ogram for …

100%1 / 422
User Manual SIPLACE S-23 HM 3 Introduction and Basic Concepts
Software Version SR.405.xx 05/99 Issue 3.3 User Interface - Views and Menus
103
Gantry 1 F5 3
This allows you to call the Single functions for gantry 1. These functions can be used, for example,
to test the revolver head functions. 3
NOTE
Each of the two gantries can be addressed separately.
The functions are identical for all the gantries. 3
Gantry 2 F6 3
This allows you to call the Single functions for gantry 2. 3
Transport 2 F7 3
Single functions for PCB conveyor 2 (= left conveyor track in the case of twin conveyors) 3
NOTE
The single functions for Conveyor 2 cannot be called unless twin conveyors are configured.
The functions are identical to the functions for Conveyor 1. 3
Transport 1 F8 3
Used to call the single functions for PCB conveyor 1 (= right conveyor track in the case of twin
conveyors). These are used to test and set the functional modules for PCB conveyor as well as
to set the conveyor width. 3
NOTE
The next two menu options belong to the group of vision functions.
These functions are used to teach and test fiducials, measure components and change package
form data.
The vision functions cannot be executed at the "Operator" access level. 3
Teach fiducialF9 3
This menu item is used to call the functions for the processing of fiducials for PCB position
detection.
For a more extensive description of the procedure refer to Chapter 6 "Vision Functions". 3
Test componentF10 3
This menu item is used to call the functions for the processing of package forms for component
centering.
For a more extensive description of the procedure refer to Chapter 6 "Vision Functions". 3
3 Introduction and Basic Concepts User Manual SIPLACE S-23 HM
3.3 User Interface - Views and Menus Software Version SR.405.xx 05/99 Issue
104
Start SITESTF11 3
This automatically starts the SITEST test program for machine set-up and calibration.
The user interface, together with the procedure for the execution of the functions, is described in
the separate User’s Manual for the SITEST test program. 3
NOTE
The SITEST test program cannot be started from the "Operator" access level. 3
GEM F12 3
This menu item is used to call the GEM interface functions.
For a more extensive description of the procedure refer to Chapter 12. 3
NOTE
The GEM interface functions cannot be called unless the GEM interface has been configured.
At the "Operator" access level, only the function "Send and receive messages" is available.
The GEM interface functions are not available in the current software version. 3
3.3.2.3 "Options" Menu
The "Options" menu is only available in the main view. This menu contains all the supplementary
functions. 3
È Click the required menu item and then make the appropriate settings or selections in the corre-
sponding windows or dialog boxes.
3
User Manual SIPLACE S-23 HM 3 Introduction and Basic Concepts
Software Version SR.405.xx 05/99 Issue 3.3 User Interface - Views and Menus
105
Machine options... 3
Depending on access level, you can obtain information about the station configuration
("Operator") or activate or deactivate the displayed machine options ("Line engineer", "Service").3
È Click the menu item Machine options...
The following window is displayed.
3
NOTE
Only those machine options are displayed which are configured at the current station.
The different machine options and the associated functions are described in Chapter 4 Placement
Functions, Chapter 6 Vision functions and chapter 12 Station Extensions - Software. 3
È Click the checkboxes corresponding to the machine options which you want to activate or
deactivate.