00191297-02 - 第21页

User Manual S-23 HM 1 Introduction Software Version SR.405.xx 05/99 Issue 1.3 User classification 19 Station extension s/options 1 Overvie ws of the n ozzle c hangers , PCB b arcode rea ders, Re mote Se rvice, etc . 1 So…

1 Introduction User Manual S-23 HM

1.2 Structure of the User Manual Software Version SR.405.xx 05/99 Issue

information on the placement system’s energy state, which is needed for servicing and mainte-

nance work. 1

Introductory notes and basic terms 1

The automatic placement system’s controls and user interface are described in this chapter. Illus-

trations and flow charts are used to explain the structure of the user interface. 1

Placement functions 1

This chapter provides information on setting up the placement system. One section classifies the

various errors that can occur and describes the individual menus. In the "feeder modules" section

you will learn how to prepare the components and set up and check feeder modules. 1

Single functions 1

This chapter explains the individual gantry, placement head and PCB conveyor functions. After

reading this chapter, you will be able to test the operating statuses of these modules and analyze

errors that occur. 1

Vision functions 1

The functions and technical data of the PCB and component vision systems are described in this

chapter, which also contains a comprehensive description of the menus for optical PCB and com-

ponent centering and the vision parameters. 1

What to do when ... 1

Pass this chapter on to your machine operators. It contains valuable tips and tricks gained from

experience. For example, you will learn how to minimize downtimes by taking preventive action.1

Error information and diagnostics 1

This chapter contains basic instructions on how to use the information provided by the error diag-

nosis system, which also enables you to enter and save your own notes on errors that have oc-

curred. The menu-driven diagnosis system is a valuable aid to trouble-shooting and error

analysis. 1

On-line help 1

This chapter explains how to use the on-line help system. 1

Component handling 1

In this chapter you will find information concerning the feeder modules and the components they

can be used to insert. 1

User Manual S-23 HM 1 Introduction

Software Version SR.405.xx 05/99 Issue 1.3 User classification

Station extensions/options 1

Overviews of the nozzle changers, PCB barcode readers, Remote Service, etc. 1

Software installation 1

This chapter tells you how to install the software. 1

1.3 User classification

The operating software is structured so that certain functions or menus can only by used or called

by appropriately trained personnel. There are three different classes of user: 1

– operators,

– line engineers and

– service engineers.

Access to each class may be password-protected. Chapters containing information for user

classes higher than "operator" contain a reference to the user class concerned in the footer. 1

Operators 1

The operator class consists of any person who has been trained in operation of the machine.

These people are authorized to use any functions associated with operating the machine and may

call up any menus needed to use the machine. 1

Line engineers 1

Line engineers have undergone special training and are authorized to carry out line engineer ac-

tivities, such as creating set-up configurations, determining vision parameters, etc. 1

Service engineers 1

This class is reserved for Siemens engineers, who are trained to carry out servicing work and to

upgrade and retrofit the placement system. 1

WARNING

A thorough knowledge of the relevant part of this User Manual is re-

quired before carrying out any work on the machine. All work must be carried out by appropriately

trained and qualified personnel. All warning, caution and danger notes MUST be observed. 1

1 Introduction User Manual S-23 HM

1.4 Revision index Software Version SR.405.xx 05/99 Issue

PLEASE NOTE: The content of this User Manual is not part of or intended to modify a previous or

existing agreement, undertaking or legal relationship. Any undertakings entered into by Siemens

AG result from the purchase contract, which also contains complete and generally applicable

guarantees. Such contractual guarantee provisions are neither extended nor restricted by the in-

formation given in this User Manual. 1

1.4 Revision index

Manual Software version Issue

First draft S-23 HM Provisional User Manual 405 01/99

Revision S-23 HM User Manual 405 05/99