00191297-02 - 第27页
User Manual S-23 HM 1 Introduction Software Version S R.405.xx 05/99 Issue 1.7 Connection data for the placement s ystem 25 1.7 Connection dat a for the placement system 1.7.1 Electrical and pneumatic connection point s …
1 Introduction User Manual S-23 HM
1.6 The line concept Software Version SR.405.xx 05/99 Issue
24
1.6 The line concept
1.6.1 Overview
The placement system can be linked to input and output stations, screen printing systems, sol-
dering ovens and other automatic placement systems from the SIPLACE range (HS-50, S-20,
F4, F5, and the SIPLACE G glue application station). All SIPLACE modules are supplied with the
necessary data by the UNIX line computer. The placement system can also be linked to a higher
level data processing system through the use of suitable interfaces.
1.6.2 Technical data - line concept
1
System SIPLACE placement lines
Module SIPLACE HS-50 / SIPLACE 80 S-20/ SIPLACE S-23 HM
SIPLACE 80 F4 / SIPLACE F5
Peripherals Input/output stations
Screen printers
Soldering ovens
Inspection stations, etc.
Range of components From 0402 * to 55 mm x 55 mm **
PCB conveyor Automatic width adjustment
PCB format 50 mm x 50 mm to 460 mm x 460 mm
Placement speed
Depends on how the modules are connected to one
another
Space required 4 m² / SIPLACE 80 modules
7.5 m² / SIPLACE HS-50 modules
*
SIPLACE HS-50, SIPLACE 80 S-20, SIPLACE S-23 HM, or SIPLACE 80 F4 with 12-nozzle
revolver head
** SIPLACE 80 F4 / F5
User Manual S-23 HM 1 Introduction
Software Version SR.405.xx 05/99 Issue 1.7 Connection data for the placement system
25
1.7 Connection data for the placement system
1.7.1 Electrical and pneumatic connection points on the placement system
1
Fig. 1.7 - 1 Electrical and pneumatic connection points on the placement system
(1) Compressed air unit
(2) Connection for compressed air line
(3) Main power filter Z1
(4) Hole for power cable
(5) Service socket
(6) Compressed air supply connection for component changeover table
(7) Power supply connection for component changeover table
(8) Communications connection for component changeover table
(9) LAN connection in the control unit
(10) Main power switch
1 Introduction User Manual S-23 HM
1.7 Connection data for the placement system Software Version SR.405.xx 05/99 Issue
26
DANGER
The placement system is supplied with 3 x 400 V or 3 x 208 V (US version) ± 10%, 50/60 Hz main
power voltage. This means that some parts of the system carry potentially lethal voltages - even
when switched off at the main switch. Incorrect handling of the placement system can therefore
result in death or severe injury or considerable damage to equipment. 1
WARNING
NEVER detach compressed air lines while they are still pressurized. Risk of injury. 1