00191297-02 - 第373页
User Manual S-23 HM 11 S tation extensions / options Software Vers ion SR.405.xx 05/99 Iss ue 11.1 Nozzle c hanger 371 1 1.1.3 Mode of operation The nozz les are s eated in noz zle gar ages and are held i n place by a mo…
11 Station extensions / options User Manual S-23 HM
11.1 Nozzle changer Software Version SR.405.xx 05/99 Issue
370
11
Fig. 11.1 - 1 Nozzle changer overview - revolver head
Key to Fig. 11.1 - 1
(1) Magazine (2) Nozzle discarding device
(3) Container for discarded nozzles (4) Nozzle changer base
(5) Nozzle changer support 11
4
1
2
3
5
User Manual S-23 HM 11 Station extensions / options
Software Version SR.405.xx 05/99 Issue 11.1 Nozzle changer
371
11.1.3 Mode of operation
The nozzles are seated in nozzle garages and are held in place by a movable locking plate. The
locking plate can be moved 6 mm by a pneumatic cylinder. All the nozzles are either clamped or
released, depending on the position of the plate. The default position of the locking plate, i.e. if
there is no nozzle change in progress, is "closed". 11
There is a positioning fiducial for position detection on each magazine of the nozzle changer. The
magazine locations are identified by numbers 1 to 7 on the nozzle changer. The nozzle garages
in the magazines are numbered consecutively from 1 to 12 (see Fig. 11.1 - 2). 11
PLEASE NOTE 11
Special magazines are available upon request (contact Siemens PL EA 1E for details) and will be
numbered differently. 11
Picking up a nozzle 11
– The revolver head z axis moves down.
– The locking plate (item 3 in Fig. 11.1 - 2) opens and releases the nozzle garages.
– The nozzle is picked up by the sleeve of the revolver head.
– The z axis moves up.
Setting down a nozzle 11
– The locking plate (item 3 in Fig. 11.1 - 2) opens and releases the nozzle garages.
– The revolver head z axis moves down and sets the nozzle down.
– The locking plate closes.
– The revolver head z axis moves up.
Discarding defective nozzles 11
– The revolver head z axis moves down 14 mm towards the discarding device (item 2 in Fig. 11.1
- 1) and thus moves the defective nozzle into the hole in the discarding device.
– The z axis moves up again and the nozzle is stripped from the sleeve by spring wires.
– The nozzle drops into the container (item 3 in Fig. 11.1 - 1).
11 Station extensions / options User Manual S-23 HM
11.1 Nozzle changer Software Version SR.405.xx 05/99 Issue
372
Fig. 11.1 - 2 Magazine and nozzle garages
Key to Fig. 11.1 - 2
(1) Positioning fiducial
(2) Locking plate
(3) Nozzle garage
(4) Hole for the parallel pin (7) for centering the magazines
(5) Hole for the parallel pin of the slide mechanism
12 3
4
5
6
7
8
91011
12
6
5
4
3
2
1
6
7
4
5
2
3
1
9
7
8