00191297-02 - 第410页
13 Software Instal lation Users Manual S IPLACE S-23 H M 13.2 Installation of the 405.xx station software S oftware Version SR .405.xx 05/99 Issue 408 Example SR.405.x x 405 = versio n numb er This ide ntifie s the func …
Users Manual SIPLACE S-23 HM 13 Software Installation
Software Version SR.405.xx 05/99 Issue 13.1 General definitions
407
13 Software Installation
13.1 General definitions
13.1.1 Initial installation
This is the term used to describe the first time the station software is installed on the computer
system of the SIPLACE S-23 HM. During this installation, sample machine data is installed on the
station computer’s hard disk in addition to the individual "SC" (station computer) and "MC"
(machine controller) software components. 13
13.1.2 Update
If an initial installation has already been performed and a more recent release of the station
software has to be installed, this is known as an "update". When an update is performed, the
stored machine data is not overwritten!
The release is identified by the last two digits of the software version designation.
Example
SR.405.01 SR = system component 405 = version number 01 = release
(station computer)
NOTE
Software versions with recent releases are debugged versions.
They are NOT functionally different from software versions with older releases and are generally
compatible with them.
13.1.3 Upgrade
The installation of a software version with a higher version number than an already installed
software version is known as an "upgrade".
When an upgrade is performed, the machine data is retained and automatically converted to the
new data format if necessary.
The functionality of the station software is identified by the three-digit number (version number)
of the complete software version designation.
13 Software Installation Users Manual SIPLACE S-23 HM
13.2 Installation of the 405.xx station software Software Version SR.405.xx 05/99 Issue
408
Example
SR.405.xx 405 = version number This identifies the functionality of the software.
13.2 Installation of the 405.xx station software
For the procedure for the installation of the station software, please refer to the software version
description for the corresponding version. 13
NOTE
The software version description is supplied with the software package for the station software.13
13
13
13
13
13.3 Installation of the software for "Remote Service"
(option)
For the procedure for the installation of the "ReachOut" software which is used for the "Remote
Service", please refer to the software version description for the corresponding version. 13
NOTE
The software version description is supplied with the software package for the "ReachOut"
software. 13
13
User Manual S-23 HM Index
05/99 Issue
409
Index
Numerics
12/16 mm S module . . . . . . . . . . . . . . . . . . . . .355
12-segment revolver head / DLM1
. . . . . . . . . . .21
12-segment revolver head camera
. . . . . . . . . .295
12-segment revolver head, description
. . . . . . . .42
12-segment revolver head, structure
. . . . . . . . .41
24/32 mm S module
. . . . . . . . . . . . . . . . . . . . .356
2-D pattern search
. . . . . . . . . . . . . . . . . . . . . .174
8 mm S II module
. . . . . . . . . . . . . . . . . . . . . . .354
A
Abort processing . . . . . . . . . . . . . . . . . . . . . . . .100
Acceptable barcodes
. . . . . . . . . . . . . . . . . . . .119
Access level
. . . . . . . . . . . . . . . . . . . . . . . . . . .106
Accuracy
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Activating the ’PCB data transfer’ option
. . . . .384
Actuate clamping
. . . . . . . . . . . . . . . . . . . . . . .160
Actuate DP-axis
. . . . . . . . . . . . . . . . . . . . . . . .144
Actuate stopper
. . . . . . . . . . . . . . . . . . . . . . . . .160
Additional data security measures
. . . . . . . . . .390
Additional information
. . . . . . . . . . . . . . . . . . . .337
Adequately trained
. . . . . . . . . . . . . . . . . . . . . . .47
Adjusting the conveyor width
. . . . . . . . . . . . . .163
Admissible load per unit area on foundation
. . . .28
Affected employees
. . . . . . . . . . . . . . . . . . . . . .80
Ambient temperature
. . . . . . . . . . . . . . . . . . . . .27
Angular position
. . . . . . . . . . . . . . . . . . . . . . . .249
Approximate position of the component
. . . . . .249
Asynchronous conveyor mode
. . . . . . . . . . . . .380
Atmospheric humidity
. . . . . . . . . . . . . . . . . . . . .27
Authorized employees
. . . . . . . . . . . . . . . . . . . .80
Automatic selection of
measuring parameters
. . . . . . . . . . . . . . . .286
Automatic selection of
suitable measuring modes
. . . . . . . . . . . . .286
Automatic setting of the lighting
. . . . . . . . . . . .286
B
Ball . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248
Ball image option
. . . . . . . . . . . . . . . . . . . . . . .265
Ball imaging parameters
. . . . . . . . . . . . . . . . . .260
Ball measuring mode
. . . . . . . . . . . . . . . . . . . .284
Ball-driven mode
. . . . . . . . . . . . . . . . . . . . . . . .255
Barcode comparison, display
. . . . . . . . . . . . . .120
Barcodes do not match
. . . . . . . . . . . . . . . . . . 119
Barcodes match
. . . . . . . . . . . . . . . . . . . . . . . 119
Brightness value
. . . . . . . . . . . . . . . . . . . . . . . 261
Bulk case feeder
. . . . . . . . . . . . . . . . . . . . . . . 358
Buttons
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
C
Calling error information . . . . . . . . . . . . . . . . . 334
Calling help on an object
. . . . . . . . . . . . . . . . . 348
Cancel processing
. . . . . . . . . . . . . . . . . . . . . . . 95
Caption bar
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
CAUTION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Center of gravity
. . . . . . . . . . . . . . . . . . . . . . . . 29
Centering fiducial offset
. . . . . . . . . . . . . . . . . . 383
Centering pin
. . . . . . . . . . . . . . . . . . . . . . . . . . 359
Ceramic substrate centering
. . . . . . . . . . . . . . 160
Change shift
. . . . . . . . . . . . . . . . . . . . . . . . . . 314
Changeover position
. . . . . . . . . . . . . . . . . . . . 151
Changing feeder modules
. . . . . . . . . . . . . . . . 320
Changing jobs
. . . . . . . . . . . . . . . . . . . . . . . . . 312
Changing set-up nozzle changer
. . . . . . . . . . 155
Changing the conveyor mode
. . . . . . . . . . . . . 380
Changing the set-up
. . . . . . . . . . . . . . . . . . . . 320
Charging info during the call
. . . . . . . . . . . . . . 388
Chat
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389
Check the zero pulse
. . . . . . . . . . . . . . . . . . . 146
Clearing errors
. . . . . . . . . . . . . . . . . . . . . . . . 339
Close magazine locking plate
. . . . . . . . . . . . . 156
Cluster name
. . . . . . . . . . . . . . . . . . . . . . . . . . 109
Colors in the error info display
. . . . . . . . . . . . 336
Combination options
. . . . . . . . . . . . . . . . . . . . . 23
Communications connection for
component changeover table
. . . . . . . . . . . 25
Communications PC (Router)
. . . . . . . . . . . . . 387
Comp. coordinate system
. . . . . . . . . . . . . . . . 327
Comparing possible barcodes
. . . . . . . . . . . . . 119
Component
Angular position
. . . . . . . . . . . . . . . . . . . . 249
Approximate position
. . . . . . . . . . . . . . . . 249
Component barcode
. . . . . . . . . . . . . . . . . . . . 375
Component barcode reader
. . . . . . . . . . . . 35, 36
Component counter
. . . . . . . . . . . . . . . . . . . . . . 34
Component handling, overview
. . . . . . . . . . . . 353
Component outlines
. . . . . . . . . . . . . . . . . . . . 248
Component shape
. . . . . . . . . . . . . . . . . . . . . . 182
Component table, preparing
. . . . . . . . . . . . . . 359
Component verification with barcode
. . . . . . . 117