00195376-05_SM_D1_D1i_D2_D2i_EN - 第11页

Introduction 1.2.5 Abbreviations Staff Qualifications and Training Service Manual SIPLACE D1/D1i/D2/D2i 11 1.2.5 1 . 2 . 5 A b b r e v ia t io n s Abbreviations 1.3 1 . 3 S t a f f Q u a lif ic a t io n s a n d T r a in …

Introduction

Key Information 1.2.1 Information About This Service Manual (Customer Version)

10 Service Manual SIPLACE D1/D1i/D2/D2i

1.2

1.2 Key Information

Key Information

1.2.1

1.2.1 Information About This Service Manual (Customer Version)

Information About This Service Manual (Customer Version)

The service work described in this manual may only be performed by specially trained service techni-

cians, with appropriate qualifications and expertise.

If you should have any questions during the service work, please contact the SIPLACE customer hotline

directly:

(0049) 089 20800 48642

or send an e-mail to: hotline.siplace@siemens.com.

1.2.2

1.2.2 Validity of Document

Validity of Document

This document contains instructions about the service work for all D1 and D2 machines from the

SIPLACE D series.

The service work is listed on a module by module basis:

▪ If the work required for specific machines should differ from the standard procedure, this will be in-

dicated with reference to the machine number, series and various delivery statuses.

▪ Diagrams should be seen as examples e.g. the diagram of a SIPLACE D1 or machine with different

paint finish does not mean that the following information only applies to the machine type shown.

The main focus of this manual is on a description of mechanical service work.

Please refer to the circuit diagram folder supplied with your machine for any electrical checks:

▪ Siplace D1/D2 circuit diagram folder, item no. 00194841-xx (German and English)

1.2.3

1.2.3 Release History

Release History

1.2.4

1.2.4 SIPLACE on the World Wide Web (WWW)

SIPLACE on the World Wide Web (WWW)

Log into our SIPLACE® homepage at http://www.siplace.com.

► Select either the German or English version.

The different sections contain information about our products, services and contact persons.

In addition, registered customers can access the

SIPLACE User Group

. Here you can call up special

information about our placement systems e.g.

▪ Technical documentation,

▪ Technical information,

▪ Spare parts lists etc.

Registration for the user group is very simple:

► Click on the Register link.

► Fill in the registration form and send it off to us.

Soon afterwards, you will receive your access authorization with USER ID and password.

Release Changes

12/2006 First edition

05/2007 Corrected version

The following sections have been omitted, as these service tasks may only be per-

formed by the SIPLACE service engineers:

Replacement and dismantling of magnetic strips, replacement of the Y motor, re-

placement of the X and Y scales

08/2008 Corrected version

Revision of the C&P and Twin Head chapters

11/2013 Corrected version

Revision of the PCB conveyor system chapter

Introduction

1.2.5 Abbreviations Staff Qualifications and Training

Service Manual SIPLACE D1/D1i/D2/D2i 11

1.2.5

1.2.5 Abbreviations

Abbreviations

1.3

1.3 Staff Qualifications and Training

Staff Qualifications and Training

Qualified or adequately trained personnel means that these people are familiar with the setting up, op-

eration and maintenance of automatic placement systems and add-on devices and are suitably qualified,

e.g.:

▪ Have been trained, instructed or authorized to switch on and off, isolate, earth and identify electrical

circuits and system components in accordance with normal safety standards.

▪ Have been trained or instructed in the upkeep and use of appropriate safety equipment in accord-

ance with normal safety standards.

▪ Have received first aid training.

PA Placement area

CO Component

C&P Collect&Place

C&P12 Collect&Place head with 12 segments

C&P20 Collect&Place head with 20 segments

C&P6 Collect&Place head with 6 segments

CPP Collect&Pick&Place head

DC Dual conveyor

ESD Electrostatic sensitive device

EMC Electromagnetic compatibility

SC Single conveyor

PCB Printed circuit board

MTC Matrix tray changer

NC Nozzle changer

P&P Pick&Place

QC Quad lane conveyor

SC Station computer

TH TwinHead

VS Vision system

WPC Waffle pack changer

Introduction

Staff Qualifications and Training 1.2.5 Abbreviations

12 Service Manual SIPLACE D1/D1i/D2/D2i