00195376-05_SM_D1_D1i_D2_D2i_EN - 第36页
Overview DLM3 Collect&Place Head 3.5.2 Star, Fitted 36 Service Manual SIPLACE D1/D1i/D2/D2i 3.5.2 3 . 5 . 2 S t a r , F it t e d Star, Fitted Overview 3.5.3 3 . 5 . 3 F r o n t P a r t , C o m p le t e Front Part, Co…
Overview
3.5.1 Back Part, Complete DLM3 Collect&Place Head
Service Manual SIPLACE D1/D1i/D2/D2i 35
3.5
3.5 DLM3 Collect&Place Head
DLM3 Collect&Place Head
Overview
See also
4.4 C&P6/12 Head [ ➙ 113]
3.5.1
3.5.1 Back Part, Complete
Back Part, Complete
Overview
▪ 6 segment DLM3 Collect&Place head (C&P6 head)
[03041229-xx]
▪ 12 segment DLM3 Collect&Place head (C&P12
head) [03041228-xx]
NOTICE! This manual does not handle the two
placement head variants separately. The structure, func-
tion and service work described apply equally to the
C&P6 and the C&P12 head.
Legend
1. Back Part, Complete
2. Star, fitted with 12 or 6 sleeves
3. Front part, complete
4. Intermediate distributor
5. Component camera
Legend
The back part of the C&P head is fixed with four hexagon
socket-head screws (A).
Two parallel pins (B) are used to center the front part of
the C&P head.
1. Back part
2. Vacuum distributor
3. Turning station
4. Vacuum generator
5. Vacuum measurement board SP6/12
6. Brake for star
7. Distributor piece
8. "Placement circuit" valve positioning drive
9. "Reject circuit" valve positioning drive
Overview
DLM3 Collect&Place Head 3.5.2 Star, Fitted
36 Service Manual SIPLACE D1/D1i/D2/D2i
3.5.2
3.5.2 Star, Fitted
Star, Fitted
Overview
3.5.3
3.5.3 Front Part, Complete
Front Part, Complete
Overview
Legend
The star is fixed to the drive shaft of the star motor (B)
with three M3x8 fillister head screws (A).
1. Star
2. Distributor plate (fixed with adhesive) for distributing
the vacuum to the individual segments
3. 12 O-rings
4. 12 connection hoses
5. 12 valve plungers, complete, SP-12
6. 12 valves, SP-12
7. 12 air blast inlets
8. 12 sleeves
9. 12 segments
B
A
1
9
8
7
6
5
4
3
2
Legend
The front part is centered by two holes (A), into which the
parallel pins of the back part engage. The front is fixed to
the back part with four M4 x 16 fillister head screws.
1. Housing
2. Forced air unit
3. RSF - digital rotary encoder/ (board with safety cover)
4. Star drive, digital
5. Z axis drive
6. Raceway for the ball bearings on the 12 segments
7. Snap jaws to raise or lower the sleeves
Overview
3.5.4 Intermediate Distributor DLM3 Collect&Place Head
Service Manual SIPLACE D1/D1i/D2/D2i 37
3.5.4
3.5.4 Intermediate Distributor
Intermediate Distributor
Overview
3.5.5
3.5.5 Component Cameras
Component Cameras
3.5.5.1
3.5.5.1 Component Camera Type 28 – 18 x 18 – [03014449-xx]
Component Camera Type 28 – 18 x 18 – [03014449-xx]
3.5.5.2
3.5.5.2 Component Camera Type 29 – 27 x 27 – [03018637-xx]
Component Camera Type 29 – 27 x 27 – [03018637-xx]
Legend
1. Intermediate distributor
2. 4 M3x10 spacer bolts with snap fasteners
3. Front section of C&P head
Legend
1. Component camera - type 28
2. Fastening screws
3. Illumination control board
Component spectrum: up to 18.7 x 18.7
Field of vision: up to 24.5 x 24.5
Legend
1. Component camera lens system and illumination
2. Camera amplifier
3. Illumination controller
Component spectrum: up to 27 x 27
Field of vision: 31 x 31