00197962-01_2nd_HMI_and_Tower_Light_en - 第17页

Installing a Second Human Machine Interface 2.3.2 Step 2: Laying the Cable Branch into th e Machine Installin g the Cable Branch into the Base Machine Assembly Instructions SIPLACE E 17 2.3.2 2 . 3 . 2 S t e p 2 : L a y …

Installing a Second Human Machine Interface

Installing the Cable Branch into the Base Machine 2.3.1 Step 1: Removing the Base Machine Metal Covers

16 Assembly Instructions SIPLACE E

► Remove the metal covers (1) at the bottom on the movable table side of the machine.

► Remove the metal cover (1) at the bottom right on the movable table side of the machine (location 2).

► Remove the metal cover (1) at the top right on the movable table side of the machine (location 2).

Installing a Second Human Machine Interface

2.3.2 Step 2: Laying the Cable Branch into the Machine Installing the Cable Branch into the Base Machine

Assembly Instructions SIPLACE E 17

2.3.2

2.3.2 Step 2: Laying the Cable Branch into the Machine

Step 2: Laying the Cable Branch into the Machine

► Connect the DVI and the USB extension cables (1) to the BoxPC ports according to the wiring dia

gram PC to 2nd HMI frame kit.

See "2.6.1 Wiring Diagram PC to 2nd HMI Frame Kit" [ ➙ 28].

► Push the extension cable branch through the opening hole (2) on top of the BoxPC.

► Push the extension cable branch through the opening hole (1) on the right side.

Installing a Second Human Machine Interface

Installing the Cable Branch into the Base Machine 2.3.2 Step 2: Laying the Cable Branch into the Machine

18 Assembly Instructions SIPLACE E

► Ensure that the extension cable branch is kept to the side of the wall (1) and does not cross the blue

pneumatic tubing.

► Lay the extension cable branch (1) alongside the other cables and the pneumatic tubing.