00197447-01_AI_Innenraumbeleuchtung_X-Serie_S_de_en - 第37页
Installation Preparatory Steps Inner Illumination Innenraumbeleuchtung 37 3 3 I n s t a lla t io n Installation 3.1 3 . 1 P r e p a r a t o r y S t e p s Preparatory Steps ► Switch off the machine, disconnec t it from th…
Brief description
Required Working Time
36 Inner Illumination Innenraumbeleuchtung
2.4
2.4 Required Working Time
Required Working Time
The complete installation will take approx. 1 hour.
Installation
Preparatory Steps
Inner Illumination Innenraumbeleuchtung 37
3
3 Installation
Installation
3.1
3.1 Preparatory Steps
Preparatory Steps
► Switch off the machine, disconnect it from the power supply and secure it to prevent unauthorized
reactivation. Observe the instructions in section "1.2 Preparatory Work..." [ ➙ 31].
► Move the component trolley out of the machine.
See also
1.2 Preparatory Work... [ ➙ 31]
3.2
3.2 Installing the Inner Illumination
Installing the Inner Illumination
One light bar can be installed per placement area. In the following, the installation in placement area 1
is described as an example. The arrangement in placement area 2 is mirrored.
► Open the cover and fix it in a position which gives you best access for working and which ensures
that it cannot close itself on its own.
► Screw the two brackets onto the mounting plate using
the four M4x6 screws (positions 1 to 4).
► Screw the assembly consisting of brackets and
mounting plate to the provided fixation points at the
top of the machine interior (1 and 2, top left at location
1 for placement area 1, top right at location 3 for
placement area 2). Use the two M4x10 screws.
► Slide the light bar into the brackets. Make sure that
the light bar engages.
► Run the cable through the cable clip and fix the cable
clip to the provided bolt in front of the light bar.
Installation
Installing the Inner Illumination
38 Inner Illumination Innenraumbeleuchtung
► In the machine interior, find the provided power sup-
ply cable and run it out of the machine.
► Run the cable of the light bar out of the machine.
► Connect one Mini-Mate connector [00354616-xx]
each to the cable ends.
► Connect the two cables (1 and 2).
Ensure the correct polarity of the lines.
► Open the distributor door.
► Find the provided power supply cable [03106366-01].
► Connect the Mini-Mate connector [03002124-xx ] to
cable [03106366-01]. Connect the cable to connector
X28qa (1).
► Close the distributor door.