AltaPail II Bulk Melters Product Manual - 第133页

Advanced Software Me lter Configuration 7 -47 Part 1121836_03 E 1 1/2014 Nordson Corporation Viewing Sys tem Data Use the System Data s creen to view current a nd historical informa tion. NOTE: You can also view s ystem …

100%1 / 230
Advanced Software Melter Configuration
7-46
Part 1121836_03
E 11/2014 Nordson Corporation
Resetting Password Codes
Use Reset Password to revert all 3 levels of password codes back to their
default codes.
The following are the default password level numeric codes:
Level # Default Code Notes
1 1000
S
Cannot start with the number 0 (zero).
S
Can be one up to five numbers long.
S
The largest 5 digit number is 65535.
S
Each
level
must
have
a
unique
numeric
code.
2 2000
3 3000
Administration
Done
Home
System Reset
Display/Save Diagnostics
Recipes
Lockout Communication
Reset Password Display System Data
Off
Confirm
Yes No
Are you sure you want to reset all passwords to factory default?
1. From the Home Display touch
Master
Controls
2. Touch System, then Administration.
3. Touch Reset Password. A pop-up message appears.
4. Touch Yes to revert all three password level codes to their default values.
5. Touch Done.
Advanced Software Melter Configuration
7-47
Part 1121836_03
E 11/2014 Nordson Corporation
Viewing System Data
Use the System Data screen to view current and historical information.
NOTE: You can also view system data by touching the located at the
bottom of the Home screen.
Administration
Done
Home
System Reset
Display/Save Diagnostics
Recipes
Lockout Communication
Reset Password Display System Data
Off
Done
Home
System Data
Hours Heaters On: 455
Firmware Version: 4;40
Motor Board Firmware Version: 7.2
Unit On Time: (Hours): 383
Time in Standby (Hours): 22
Service Interval: 500
Hours Until Service Alert: 1
1. From the Home Display touch
Master
Controls
2. Touch System, then Administration.
3. Touch Display System Data. Review the information.
4. Touch Done.
Advanced Software Melter Configuration
7-48
Part 1121836_03
E 11/2014 Nordson Corporation
Locking Out Communications
Use Lockout Communication to prevent remote access to the melter while
you are troubleshooting or performing maintenance on the melter.
Administration
Done
Home
System Reset
Display/Save Diagnostics
Recipes
Lockout Communication
Reset Password Display System Data
Off
1. From the Home Display touch
Master
Controls
2. Touch System, then Administration.
3. Touch the Lockout Communication button to toggle it On or Off
4. Touch Done.