AltaPail II Bulk Melters Product Manual - 第146页

1 Maintenanc e 8-9 Part 1121836_03 E 11/2014 Nordson Corporation Gear P ump Checking for Leakage Variseals a re fixed in pla ce on the pump with a flange (1). If material escapes along the shaft, the pump shaft s eal mus…

Maintenance

8-8

Part 1121836_03

E 11/2014 Nordson Corporation

Motor / Gear Box

Change lubricant

Observe when changing lubricant:

Drain lubricant when warm

Use only the stated lubricant or one that has proven to be equivalent.

Using any other lubricant can result in premature wear and/or damage to

the gear box

Properly dispose of the old lubricant according to local regulations.

Remove gear box from the motor to change lubricant. Wash out casing with

suitable cleaning agent and remove lubricant residue.

Lubricant Changing Interval

When lubricant temperature is below 100° C / 212° F:

Every 15000 hours of operation or at least every 2 to 3 years.

Capacity

The lubricant quantity is indicated on the ID plate.

NOTE: Never mix different types of lubricants.

Lubricant Selection

Lubricant manufacturer Mineral oil CLP 220

AGIP Blasia 220

ARAL Degol BMB 220 or Degol BG 220

BP Energol GR-XP 220

DEA Falcon CLP 220

ESSO Spartan EP 220 or GP 90

KLÜBER Klüberoil GEM 1-220

OPTIMOL Optigear 220

SHELL Omala Oil 220

TEXACO Geartex EP-A SAE 85 W-90

Maintenance

8-9

Part 1121836_03

E 11/2014 Nordson Corporation

Gear Pump

Checking for Leakage

Variseals are fixed in place on the pump with a flange (1). If material escapes

along the shaft, the pump shaft seal must be replaced.

NOTE: A special assembly tool is needed for replacement. Refer to the

separate document Parts List. However, Nordson recommends replacing the

pump and sending the old one in to be repaired. Refer to page 10-2,

Replacing Gear Pump.

Maintenance

8-10

Part 1121836_03

E 11/2014 Nordson Corporation

This page intentionally left blank.