AltaPail II Bulk Melters Product Manual - 第23页
Safety 1-12 E 11/2014 Nordson Corporation Safe_PPA1011LUE_EN Table 1-2 Sa fety Labels and Tags Position P/N D escription 1 290083 WARNING: Risk of elec trical shock. Failure to observe may result in personal injury, deat…
Safety
1-11
E 11/2014 Nordson Corporation
Safe_PPA1011LUE_EN
Safety Labels and Tags
Figure 1-1 illustrates the location of the safety labels and warning tags affixed
to the equipment. Table -2 provides an illustration of the hazard identification
symbols that appear on the safety labels and tags, the meaning of the
symbols and the exact wording of the safety message.
1
2
3
4
5
2
Figure 1-1 Safety Labels and Tags
Safety
1-12
E 11/2014 Nordson Corporation
Safe_PPA1011LUE_EN
Table 1-2 Safety Labels and Tags
Position P/N Description
1 290083 WARNING: Risk of electrical shock. Failure to observe may result
in personal injury, death, or equipment damage.
2 290082 WARNING: Hot surface. Failure to observe can cause burns.
3 421460 WARNING: Risk of pinching parts of the body between platen
and container. Ensure that, during operation, no one else is near
the system.
4, and 5 1059866 TAGS, SHEET OF, VERSA/DURABLUE LG, CE LANG
6 10000291 TAG,UNIT STAMPING,ALTAPAIL II
7 7140255 SIGN "MAX. 8 BAR" SELF ADHESIVE
NOTE: All the safety labels and tags can't be wiped by organic
solvents(alcohol, acetone,etc.)
Introduction
2-1
Part 1121836_03
E 11/2014 Nordson Corporation
Section 2
Introduction
Intended Use
Bulk melters of the series AltaPail II - hereafter also referred to as melter -
may only be used to melt and feed suitable materials. When in doubt, seek
permission from Nordson.
Any other use is considered to be unintended. Nordson will not be liable for
personal injury or property damage resulting from unintended use.
Intended use includes the observance of Nordson safety instructions.
Nordson recommends obtaining detailed information on the materials to be
used.
Unintended Use - Examples -
The bulk melters may not be used under the following conditions:
S
In defective condition
S
With electrical cabinet door open
S
In a potentially explosive atmosphere
S
With unsuitable operating/processing materials
S
When the values stated under Technical Data are not complied with.
The systems may not be used to process the following materials:
S
Explosive and flammable materials
S
Erosive and corrosive materials
S
Food products.
Do not use the platen
S
As a press
S
To lift loads
S
To heat objects.
Area of Use
The bulk melter is designed for use in industrial areas.
When using in industrial areas and in small businesses, the system may
cause interference in other electrical units, e.g. radios.