AltaPail II Bulk Melters Product Manual - 第92页
Advanced Software M elter Configuration 7 -6 Part 1121836_03 E 1 1/2014 Nordson Corporation Defining a Global Set Poin t Tempera ture f or A ll Applicators Use global set point temperature to configure only the applicato…
Advanced Software Melter Configuration
7-5
Part 1121836_03
E 11/2014 Nordson Corporation
Defining a Global Set Point Temperature for All Hoses
Use global set point temperature to configure only the hoses with a uniform
set point temperature.
For Melters:
7407039, 7407040, 7407041. 7407042, 7407668 and 7407669
Default Minimum Maximum
176°C (350°F) 40°C (100°F) 176°C (350°F)
For Melters:
7407664, 7407665, 7407666, 7407667, 7407670 and 7407671
Default Minimum Maximum
232°C (450°F) 40°C (100°F) 232°C (450°F)
NOTE: Defining a global set point temperature enables previously disabled
zones.
Temperature
Done
Home
Global Set Point
Temperature Limits
Set Point - All Applicators
Set Point - All Hoses
Done
Cancel
7 8 9
4 5 6
1 2 3
0
Set Point - All Hoses
176
Home
C
o
1. From the Home Display touch
Master
Controls
2. Touch Settings, then Temperature.
3. Touch Set Point - All Hoses and enter the set point temperature you
want for all available hoses.
4. Touch Done.
Advanced Software Melter Configuration
7-6
Part 1121836_03
E 11/2014 Nordson Corporation
Defining a Global Set Point Temperature for All Applicators
Use global set point temperature to configure only the applicators with a
uniform set point temperature.
For Melters:
7407039, 7407040, 7407041. 7407042, 7407668 and 7407669
Default Minimum Maximum
176°C (350°F) 40°C (100°F) 176°C (350°F)
For Melters:
7407664, 7407665, 7407666, 7407667, 7407670 and 7407671
Default Minimum Maximum
232°C (450°F) 40°C (100°F) 232°C (450°F)
NOTE: Defining a global set point temperature enables previously disabled
zones.
Temperature
Done
Home
Global Set Point
Temperature Limits
Set Point - All Applicators
Set Point - All Hoses
Done
Cancel
7 8 9
4 5 6
1 2 3
0
Set Point - All Applicators
176
Home
C
o
1. From the Home Display touch
Master
Controls
2. Touch Settings, then Temperature.
3. Touch Set Point - All Applicators and enter the set point temperature
you want for all available applicators.
4. Touch Done.
Advanced Software Melter Configuration
7-7
Part 1121836_03
E 11/2014 Nordson Corporation
Defining Ready Delay Settings
Use Ready Delay to define the amount of time you want to elapse after all of
zones have reached their set point temperatures before the melter
Ready\OK status appears.
Default Minimum Maximum
0 (Zero) minutes 0 (Zero) minutes 60 minutes
NOTE: The ready delay time only functions when the temperature of the
platen, at the time the melter is turned on, is more than 27 °C (50 °F) from its
set point temperature.
NOTE: The ready delay time begins when all components are within 3 °C (5
°F) of their respective set point temperatures.
Accessing Ready Delay Settings
Settings
Done
Home
Temperature
Input
Ready Delay
Standby
Output Pump
Done
Cancel
7 8 9
4 5 6
1 2 3
0
Ready Delay
0
Home
min
1. From the Home Display touch
Master
Controls
2. Touch Settings, then Ready Delay.
3. Enter the number of minutes you want to delay the Ready\OK melter
status.
4. Touch Done.