GD450 说明书(中英文版） - 第101页
- 1 0 1 - 图 6 - 2 - 6 Pix 6-2-6 注意：测试期间会弹出图 6-2-7 显示测试 2D 的画面，这个不用管。软件要求是这样的。 Note: Pix 6 -2-7 which is the 2D test picture will com e out during the test. Please do n ot worry about this. It is the requirement from the …
- 100 -
Pix 6-2-4
5、回到 HTGD 软件主界面，确认生产设置中的选项跟图 6-2-3 一致，点软件界面上的开始按
钮，将 PCB 放入机器轨道一端，开始测试。点击 HTGD 软件主界面上“SPC”按钮。采样 100
次。得出图 6-2-5 或者图 6-2-6 中的结果。
Back to HTGD main interface and confirm the options in the production settings are
consistent with the options in pix 6-2-3. Click “开始”（start） button in the software interface.
Put the PCB into the end of the machine track and start test. Click “SPC” button in HTGD
software main interface. Do the sampling 100 times. Get the results in pix 6-2-5 and pix
6-2-6.
图 6-2-5
Pix 6-2-5
- 101 -
图 6-2-6
Pix 6-2-6
注意：测试期间会弹出图 6-2-7 显示测试 2D 的画面，这个不用管。软件要求是这样的。
Note: Pix 6-2-7 which is the 2D test picture will come out during the test. Please do not
worry about this. It is the requirement from the software.
- 102 -
图 6-2-7 Pix 6-2-7
最后测试 100PCS 将图 E，图 F 截图，放到 Word 中，打印出来即可。
Finally, test 100 PCS and get the screenshot of pix E and pix F. Put the two screenshots
into Word and print them out.
THE END!