GD450 说明书(中英文版） - 第37页
- 3 7 - Pix 3-1 1(input the distance dat a between PCB mark point and side. The size relationship in pix 3-10 is for the reference.) 图 3- 12 （ PCB 定位）
- 36 -
图 3-10【PCB Mark 点到边距离】
Pix 3-10(the distance between PCB mark and side)
图 3-10 是 PCB Mark 点到边的距离，输入后搜索 PCB Mark 点时，所选的 PCB Mark
点能直接出现在视域里；
It is the distance between PCB mark and side show in the pix 3-10. Input the distance
date when search the PCB mark point, the selected PCB mark point can show in the
field of vision.
图 3-11（输入 PCB Mark 点到边距离，尺寸关系参考图 3-10）
- 37 -
Pix 3-11(input the distance data between PCB mark point and side. The size relationship in
pix 3-10 is for the reference.)
图 3-12（PCB 定位）
- 38 -
Pix 3-12(PCB positioning)
注意：设置好 PCB 标志点到边距离后，将 PCB 放置在运输轨道入口处，点击 [自动定位]PCB
自动送到预定位置并固定夹紧。如图 3-12；点击[Z 轴上升]将
PCB 顶到钢网位置，打开(网框固定阀)把钢网放入并与 PCB 对齐。
Notice: Place the PCB in the entrance of the transmission rail after setting the
distance between PCB mark and side. Click (automatic positioning) button, PCB
will be delivered automatically to the preset position and will be clamped and
fixed. See pix 3-12. By clicking(Z axis lifts up) button, the PCB will be lift to the
stencil position. Turn on frame fixed valve and put in the stencil and let stencil
align at PCB.