QP132三级参考手册.pdf.pdf - 第39页
Notes: Chapter 1 1.4 T raining Evaluation Edition 1.0 1-12 QP-132 Level 3 T utorial
1.4 Training Evaluation
Circle the most appropriate answer from the list below.
(1) To replace MX or MY motor, boot up the machine in:
a. mechanical check mode.
b. normal mode.
c. normal mode with Proper data setting.
(2) To measure PCB Pickup Position MX, move the axis by:
a. hand.
b. inching.
c. command.
(3) To replace the MY motor, set the velocity gain:
a. lower.
b. higher.
c. the same value.
(4) To measure PCB Landing Position MX FDW, adjust the distance between
the right edge of the reference jaw and left edge of the pallet to:
a. 1.2 mm.
b. 1.3 mm.
c. 1.4 mm.
(5) To adjust PCB Retaining Cylinder for Manipulator, which tool is
required?
a. 0.5 mm feeler gauge
b. 0.8 mm feeler gauge
c. 1.6 mm PCB
Chapter 1 1.4 Training Evaluation
Edition 1.0 1-11 QP-132 Level 3 Tutorial
Notes:
Chapter 1 1.4 Training Evaluation
Edition 1.0 1-12 QP-132 Level 3 Tutorial
Chapter 2
Out Manipulator